Shear Bond Strength of Resin Luting Materials to Lithium Disilicate Ceramic: Correlation between Flexural Strength and Modulus of Elasticity

• Published in: Polymers 2023-02, Vol.15 (5), p.1128
• Main Authors: Irie, Masao, Okada, Masahiro, Maruo, Yukinori, Nishigawa, Goro, Matsumoto, Takuya
• Format: Article
• Language: English
• Subjects: Adhesives; Bond strength; Bonding strength; Cement; Cements; Ceramics; Composite materials; Curing; Dental acrylic resins; Dental adhesives; Dental glass ionomer cements; Dental resins; Distilled water; Elasticity; Flexural strength; Hypotheses; Light; Lithium; Lithium compounds; Materials research; Mechanical properties; Modulus of elasticity; Modulus of rupture in bending; Polymerization; Regression analysis; Resins; Shear; Shear (Mechanics); Silicates; Software; Statistical analysis; Variance analysis
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym15051128

This study investigates the effect of the curing mode (dual-cure vs. self-cure) of resin cements (four self-adhesive and seven conventional cements) on their flexural strength and flexural modulus of elasticity, alongside their shear bond strength to lithium disilicate ceramics (LDS). The study aims to determine the relationship between the bond strength and LDS, and the flexural strength and flexural modulus of elasticity of resin cements. Twelve conventional or adhesive and self-adhesive resin cements were tested. The manufacturer's recommended pretreating agents were used where indicated. The shear bond strengths to LDS and the flexural strength and flexural modulus of elasticity of the cement were measured immediately after setting, after one day of storage in distilled water at 37 °C, and after 20,000 thermocycles (TC 20k). The relationship between the bond strength to LDS, flexural strength, and flexural modulus of elasticity of resin cements was investigated using a multiple linear regression analysis. For all resin cements, the shear bond strength, flexural strength, and flexural modulus of elasticity were lowest immediately after setting. A clear and significant difference between dual-curing and self-curing modes was observed in all resin cements immediately after setting, except for ResiCem EX. Regardless of the difference of the core-mode condition of all resin cements, flexural strengths were correlated with the LDS surface upon shear bond strengths ( = 0.24, = 69, < 0.001) and the flexural modulus of elasticity was correlated with them ( = 0.14, = 69, < 0.001). Multiple linear regression analyses revealed that the shear bond strength was 17.877 + 0.166, the flexural strength was 0.643, and the flexural modulus was ( = 0.51, = 69, < 0.001). The flexural strength or flexural modulus of elasticity may be used to predict the bond strength of resin cements to LDS.