Quality Analysis of Micro-Holes Made by Polymer Jetting Additive Manufacturing

• Published in: Polymers 2023-12, Vol.16 (1), p.32
• Main Author: Udroiu, Razvan
• Format: Article
• Language: English
• Subjects: 3-D printers; 3D printing; Accuracy; Additive manufacturing; Design; Experiments; Geometry; Industrial applications; International economic relations; Manufacturing; Microholes; Microscopy; Photopolymers; Polymer industry; Polymers; Quality standards; Statistical analysis
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym16010032

Material jetting technology is gaining popularity, especially in polymer science, because of their high accuracy for additive manufacturing (AM) products. This paper aims to investigate the quality of micro-holes that are oriented in three basic directions, and manufactured by the material jetting AM process. This paper proposes a novel methodology to evaluate the accuracy of micro-holes features by using a transparent artifact. A test artifact with horizontal and vertical micro-holes in it, with industrial applications, was designed. Micro-holes were placed on planar and curve surfaces. Samples were manufactured by PolyJet technology from a translucent photopolymer resin which allows a facile investigation (by microscopy) of the inner structure of the micro-holes. The features of ten micro-holes printed in matte and glossy finish type, with diameters in coarse and medium options, according to ISO/ASTM 52902, were analyzed. Quality analysis of the micro-holes features was performed by microscopy investigations. The effects of main factors on the deviation of the micro-hole diameter were investigated by using the statistical design of experiments, and four control factors were considered. The best results were obtained for sample printed in matte finishing with the micro-holes oriented along the -axis and -axis. The smallest diameter of the micro-holes obtained by PolyJet technology on an EDEN 350 machine was 0.5 mm, but in industrial applications for a facile post-processing, a higher diameter is recommended to be used. A confirmatory experiment on a wing sample, with a number of micro-holes of the same diameter and a large length to diameter ratio of the micro-holes, was performed, and the repeatability of the results was confirmed.