Improvement of the Technology of Precision Forging of Connecting Rod-Type Forgings in a Multiple System, in the Aspect of the Possibilities of Process Robotization by Means of Numerical Modeling

• Published in: Materials 2024-02, Vol.17 (5), p.1087
• Main Authors: Hawryluk, Marek, Dudkiewicz, Łukasz, Polak, Sławomir, Barełkowski, Artur, Miżejewski, Adrian, Szymańska, Tatiana
• Format: Article
• Language: English
• Subjects: Analysis; Connecting rods; Deformation; Diameters; Efficiency; Forgings; Grain size; Grippers; Hammers; Hot rolling; Mathematical models; Measurement techniques; Metal forming; Metalworking machinery; Numerical analysis; Numerical models; Optimization; Precision forging; Product quality; Robots; Roughing; Technology
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma17051087

The study refers to the application of numerical modeling for the improvement of the currently realized precision forging technology performed on a hammer to produce connecting rod forgings in a triple system through the development of an additional rolling pass to be used before the roughing operation as well as preparation of the charge to be held by the robot's grippers in order to implement future process robotization. The studies included an analysis of the present forging technology together with the dimension-shape requirements for the forgings, which constituted the basis for the construction and development of a thermo-mechanical numerical model as well as the design of the tool construction with the consideration of the additional rolling pass with the use of the calculation package Forge 3.0 NxT. The following stage of research was the realization of multi-variant numerical simulations of the newly developed forging process with the consideration of robotization, as a result of which the following were obtained: proper filling of the tool impressions (including the roller's impression) by the deformed material, the temperature distributions for the forging and the tools as well as plastic deformations (considering the thermally activated phenomena), changes in the grain size as well as the forging force and energy courses. The obtained results were verified under industrial conditions and correlated with respect to the forgings obtained in the technology applied so far. The achieved results of technological tests confirmed that the changes introduced into the tool construction and the preform geometry reduced the diameter, and thus also the volume, of the charge as well as provided a possibility of implementing robotization and automatization of the forging process in the future. The obtained results showed that the introduction of an additional rolling blank resulted in a reduction in forging forces and energy by 30% while reducing the hammer blow by one. Attempts to implement robotization into the process were successful and did not adversely affect the geometry or quality of forgings, increasing production efficiency.