Effect of Part Size, Displacement Rate, and Aging on Compressive Properties of Elastomeric Parts of Different Unit Cell Topologies Formed by Vat Photopolymerization Additive Manufacturing

• Published in: Polymers 2024-11, Vol.16 (22), p.3166
• Main Authors: Bezek, Lindsey B, Nakarmi, Sushan, Pantea, Alexander C, Leiding, Jeffery A, Daphalapurkar, Nitin P, Lee, Kwan-Soo
• Format: Article
• Language: English
• Subjects: 3D printing; Additive manufacturing; Aging; Aging (materials); Biological products; Cellular manufacture; Cellular structure; Compressive properties; Data compression; Deformation; Design; Elastomers; Energy absorption; Manufacturing; Photopolymerization; Plastic foam; Polyurethane foam; Polyurethanes; Simulation; Simulation methods; Topology; Unit cell; Viscoelasticity
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym16223166

Due to its ability to achieve geometric complexity at high resolution and low length scales, additive manufacturing (AM) has increasingly been used for fabricating cellular structures (e.g., foams and lattices) for a variety of applications. Specifically, elastomeric cellular structures offer tunability of compliance as well as energy absorption and dissipation characteristics. However, there are limited data available on compression properties for printed elastomeric cellular structures of different designs and testing parameters. In this work, the authors evaluate how unit cell topology, part size, the rate of compression, and aging affect the compressive response of polyurethane-based simple cubic, body-centered, and gyroid structures formed by vat photopolymerization AM. Finite element simulations incorporating hyperelastic and viscoelastic models were used to describe the data, and the simulated results compared well with the experimental data. Of the designs tested, only the parts with the body-centered unit cell exhibited differences in stress-strain responses at different part sizes. Of the compression rates tested, the highest displacement rate (1000 mm/min) often caused stiffer compressive behavior, indicating deviation from the quasi-static assumption and approaching the intermediate rate response. The cellular structures did not change in compression properties across five weeks of aging time, which is desirable for cushioning applications. This work advances knowledge on the structure-property relationships of printed elastomeric cellular materials, which will enable more predictable compressive properties that can be traced to specific unit cell designs.