Effect of repeated sterilization cycles on the physical properties of scaling instruments: a scanning electron microscopy study

Repeated sterilizations cycles cause undesirable alterations in the material properties of the instruments, such as corrosion, alterations in the hardness of the metal and the loss of the cutting sharpness of the instrument. This research examined the effect of repeated dry heat sterilization and au...

Full description

Saved in:
Bibliographic Details
Published in:Journal of international oral health 2015-05, Vol.7 (5), p.1-4
Main Authors: Porto, Alessandra Nogueira, Borges, Álvaro Henrique, Semenoff-Segundo, Alex, Raslan, Suzane A, Pedro, Fábio Luis Miranda, Jorge, Antônio Olavo Cardoso, Bandeca, Matheus Coelho
Format: Article
Language:English
Subjects:
Heat
Original Research
Scanning electron microscopy
Sodium
Sterilization
Temperature
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Repeated sterilizations cycles cause undesirable alterations in the material properties of the instruments, such as corrosion, alterations in the hardness of the metal and the loss of the cutting sharpness of the instrument. This research examined the effect of repeated dry heat sterilization and autoclaves cycles on carbon steel (CS) and stainless steel (SS) curettes during the scaling and root planning. A total of 77 Gracey curettes were used in this study. Of these, 35 were SS and 42 were CS curettes submitted in different process: Dry heat, autoclave, inhibition of corrosion and autoclave, scaling, root planning and dry heat, scaling, root planning, inhibition of corrosion and autoclave. The inhibition of corrosion used on the carbon curettes (prior to sterilization in the autoclave) was sodium nitrite at 2%. The curettes received 10 consecutive cycles of sterilization and after that the cutting edges were examined in the electronic microscope, at 60 and 100 magnification times. The images were evaluated by three independent examiners, who compared the photographs of each group with the control group. The surface corrosion products and a deterioration of the edges were observed and the results showed that the SS curettes suffered little alteration with sterilization, scaling, root planning whereas the CS curettes were visibly affected by sterilization in the autoclave, but when the inhibition of corrosion was used prior to the sterilization, the oxidation was considerably reduced.
ISSN:0976-7428
0976-1799