Piezoresistive effects in controllable defective HFTCVD graphene-based flexible pressure sensor

• Published in: Scientific reports 2015-10, Vol.5 (1), p.14751-14751, Article 14751
• Main Authors: Mohammad Haniff, Muhammad Aniq Shazni, Muhammad Hafiz, Syed, Wahid, Khairul Anuar Abd, Endut, Zulkarnain, Wah Lee, Hing, Bien, Daniel C. S., Abdul Azid, Ishak, Abdullah, Mohd. Zulkifly, Ming Huang, Nay, Abdul Rahman, Saadah
• Format: Article
• Language: English
• Subjects: 639/301/1005/1009; 639/925/918/1053; Defects; Humanities and Social Sciences; multidisciplinary; Pressure; Pressure sensors; Science; Sensors; Temperature effects
• ISSN: 2045-2322; 2045-2322
• DOI: 10.1038/srep14751

In this work, the piezoresistive effects of defective graphene used on a flexible pressure sensor are demonstrated. The graphene used was deposited at substrate temperatures of 750, 850 and 1000 °C using the hot-filament thermal chemical vapor deposition method in which the resultant graphene had different defect densities. Incorporation of the graphene as the sensing materials in sensor device showed that a linear variation in the resistance change with the applied gas pressure was obtained in the range of 0 to 50 kPa. The deposition temperature of the graphene deposited on copper foil using this technique was shown to be capable of tuning the sensitivity of the flexible graphene-based pressure sensor. We found that the sensor performance is strongly dominated by the defect density in the graphene, where graphene with the highest defect density deposited at 750 °C exhibited an almost four-fold sensitivity as compared to that deposited at 1000 °C. This effect is believed to have been contributed by the scattering of charge carriers in the graphene networks through various forms such as from the defects in the graphene lattice itself, tunneling between graphene islands and tunneling between defect-like structures.