A Framework for Local Mechanical Characterization of Atherosclerotic Plaques: Combination of Ultrasound Displacement Imaging and Inverse Finite Element Analysis

• Published in: Annals of biomedical engineering 2016-04, Vol.44 (4), p.968-979
• Main Authors: Akyildiz, Ali C., Hansen, Hendrik H. G., Nieuwstadt, Harm A., Speelman, Lambert, De Korte, Chris L., van der Steen, Antonius F. W., Gijsen, Frank J. H.
• Format: Article
• Language: English
• Subjects: Animals; Arteries; Biochemistry; Biological and Medical Physics; Biomedical and Life Sciences; Biomedical Engineering and Bioengineering; Biomedicine; Biophysics; Classical Mechanics; Displacement; Finite Element Analysis; Finite element method; Histology; Iliac Artery - diagnostic imaging; Iliac Artery - physiopathology; Imaging; Inverse; Mathematical analysis; Plaque, Atherosclerotic - diagnostic imaging; Plaque, Atherosclerotic - physiopathology; Search methods; Swine; Ultrasonography; Ultrasound
• ISSN: 0090-6964; 1573-9686
• DOI: 10.1007/s10439-015-1410-8

Biomechanical models have the potential to predict plaque rupture. For reliable models, correct material properties of plaque components are a prerequisite. This study presents a new technique, where high resolution ultrasound displacement imaging and inverse finite element (FE) modeling is combined, to estimate material properties of plaque components. Iliac arteries with plaques were excised from 6 atherosclerotic pigs and subjected to an inflation test with pressures ranging from 10 to 120 mmHg. The arteries were imaged with high frequency 40 MHz ultrasound. Deformation maps of the plaques were reconstructed by cross correlation of the ultrasound radiofrequency data. Subsequently, the arteries were perfusion fixed for histology and structural components were identified. The histological data were registered to the ultrasound data to construct FE model of the plaques. Material properties of the arterial wall and the intima of the atherosclerotic plaques were estimated using a grid search method. The computed displacement fields showed good agreement with the measured displacement fields, implying that the FE models were able to capture local inhomogeneities within the plaque. On average, nonlinear stiffening of both the wall and the intima was observed, and the wall of the atheroslcerotic porcine iliac arteries was markedly stiffer than the intima (877 ± 459 vs. 100 ± 68 kPa at 100 mmHg). The large spread in the data further illustrates the wide variation of the material properties. We demonstrated the feasibility of a mixed experimental–numerical framework to determine the material properties of arterial wall and intima of atherosclerotic plaques from intact arteries, and concluded that, due to the observed variation, plaque specific properties are required for accurate stress simulations.