Finite Element Model and Validation of Nasal Tip Deformation

• Published in: Annals of biomedical engineering 2017-03, Vol.45 (3), p.829-838
• Main Authors: Manuel, Cyrus T., Harb, Rani, Badran, Alan, Ho, David, Wong, Brian J. F.
• Format: Article
• Language: English
• Subjects: Acrylic Resins - chemistry; Biochemistry; Biological and Medical Physics; Biomedical and Life Sciences; Biomedical Engineering and Bioengineering; Biomedicine; Biophysics; Butadienes - chemistry; Classical Mechanics; Computer simulation; Constitutive relationships; Cosmetics; Deformation; Finite Element Analysis; Finite element method; Humans; Mathematical models; Models, Biological; Nose; Phantoms, Imaging; Photogrammetry; Polystyrenes - chemistry; Silicones; Silicones - chemistry
• ISSN: 0090-6964; 1573-9686
• DOI: 10.1007/s10439-016-1729-9

Nasal tip mechanical stability is important for functional and cosmetic nasal airway surgery. Palpation of the nasal tip provides information on tip strength to the surgeon, though it is a purely subjective assessment. Providing a means to simulate nasal tip deformation with a validated model can offer a more objective approach in understanding the mechanics and nuances of the nasal tip support and eventual nasal mechanics as a whole. Herein we present validation of a finite element (FE) model of the nose using physical measurements recorded using an ABS plastic-silicone nasal phantom. Three-dimensional photogrammetry was used to capture the geometry of the phantom at rest and while under steady state load. The silicone used to make the phantom was mechanically tested and characterized using a linear elastic constitutive model. Surface point clouds of the silicone and FE model were compared for both the loaded and unloaded state. The average Hausdorff distance between actual measurements and FE simulations across the nose were 0.39 ± 1.04 mm and deviated up to 2 mm at the outermost boundaries of the model. FE simulation and measurements were in near complete agreement in the immediate vicinity of the nasal tip with millimeter accuracy. We have demonstrated validation of a two-component nasal FE model, which could be used to model more complex modes of deformation where direct measurement may be challenging. This is the first step in developing a nasal model to simulate nasal mechanics and ultimately the interaction between geometry and airflow.