3D-Printable PP/SEBS Thermoplastic Elastomeric Blends: Preparation and Properties

• Published in: Polymers 2019-02, Vol.11 (2), p.347
• Main Authors: Banerjee, Shib Shankar, Burbine, Stephen, Kodihalli Shivaprakash, Nischay, Mead, Joey
• Format: Article
• Language: English
• Subjects: 3-D printers; Block copolymers; CAD; Carbon; Carbon black; Compatibility; Computer aided design; Extrusion; Flexibility; Frequency ranges; Fused deposition modeling; Injection molding; Investigations; Manufacturing; Mechanical properties; Modulus of elasticity; Morphology; Polymer blends; Polymers; Rapid prototyping; Rheological properties; Rheology; Scanning electron microscopy; Styrenes; Tensile strength; Thermoplastic elastomers; Three dimensional printing; Viscosity; Wetting
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym11020347

Currently, material extrusion 3D printing (ME3DP) based on fused deposition modeling (FDM) is considered a highly adaptable and efficient additive manufacturing technique to develop components with complex geometries using computer-aided design. While the 3D printing process for a number of thermoplastic materials using FDM technology has been well demonstrated, there still exists a significant challenge to develop new polymeric materials compatible with ME3DP. The present work reports the development of ME3DP compatible thermoplastic elastomeric (TPE) materials from polypropylene (PP) and styrene-(ethylene-butylene)-styrene (SEBS) block copolymers using a straightforward blending approach, which enables the creation of tailorable materials. Properties of the 3D printed TPEs were compared with traditional injection molded samples. The tensile strength and Young's modulus of the 3D printed sample were lower than the injection molded samples. However, no significant differences could be found in the melt rheological properties at higher frequency ranges or in the dynamic mechanical behavior. The phase morphologies of the 3D printed and injection molded TPEs were correlated with their respective properties. Reinforcing carbon black was used to increase the mechanical performance of the 3D printed TPE, and the balancing of thermoplastic elastomeric and mechanical properties were achieved at a lower carbon black loading. The preferential location of carbon black in the blend phases was theoretically predicted from wetting parameters. This study was made in order to get an insight to the relationship between morphology and properties of the ME3DP compatible PP/SEBS blends.