The Influence of the Hybridization Process on the Mechanical and Thermal Properties of Polyoxymethylene (POM) Composites with the Use of a Novel Sustainable Reinforcing System Based on Biocarbon and Basalt Fiber (BC/BF)

• Published in: Materials 2020-08, Vol.13 (16), p.3496
• Main Authors: Andrzejewski, Jacek, Gapiński, Bartosz, Islam, Aminul, Szostak, Marek
• Format: Article
• Language: English
• Subjects: Basalt; Biomass; Chalk; Charpy impact test; Composite materials; Elongation; Fillers; Glass fibers; Heat resistance; Impact strength; Injection molding; Manufacturing; Mechanical properties; Microtomography; Modulus of elasticity; Polymers; Rheological properties; Thermal analysis; Thermal resistance; Thermal stability; Thermodynamic properties; Thermomechanical analysis; Thermomechanical properties
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma13163496

The presented work focuses on the assessment of the material performance of polyoxymethylene (POM)-based composites reinforced with the use of a biocarbon/basalt fiber system (BC/BF). The use of BC particles was aimed at eliminating mineral fillers (chalk, talc) by using fully biobased material, while basalt fibers can be considered an alternative to glass fibers (GF). All materials were prepared with the same 20% filler content, the differences concerned the (BC/BF) % ratio. Hybrid samples with (25/75), (50/50), and (75/25) ratios were prepared. Additionally, reference samples were also prepared (POM BC20% and POM BF20%.). Samples prepared by the injection molding technique were subjected to a detailed analysis of mechanical properties (static tensile and Charpy impact tests), thermomechanical characteristics (dynamic mechanical thermal analysis-DMTA, heat deflection temperature - HDT), and thermal and rheological properties (DSC, rotational rheometer tests). In order to assess fiber distribution within the material structure, the samples were scanned by a microtomography method (μCT). The addition of even a significant amount of BC particles did not cause excessive material brittleness, while the elongation and impact strength of all hybrid samples were very similar to the reference POM BF20% sample. The tensile modulus and strength values appear to be strictly dependent on the increasing BF fiber content. Thermomechanical analysis (DMTA, HDT) showed very similar heat resistance for all hybrid samples; the results did not differ from the values for the POM BF20 sample.