Frame loads accuracy assessment of semianalytical multibody dynamic simulation methods of a recreational vehicle

• Published in: Multibody system dynamics 2020, Vol.50 (2), p.189-209
• Main Authors: Joubert, Nicolas, Boisvert, Maxime, Blanchette, Carl, St-Amant, Yves, Desrochers, Alain, Rancourt, Denis
• Format: Article
• Language: English
• Subjects: Accuracy; Algorithms; Angular velocity; Automotive Engineering; Center of gravity; Chassis; Component reliability; Control; Control algorithms; Control theory; Driving conditions; Dynamical Systems; Electrical Engineering; Engineering; Loads (forces); Maneuvers; Mathematical analysis; Mathematical models; Mechanical Engineering; Modelling; Multibody systems; Optimization; Recreational vehicles; Reliability aspects; Simulation; Trajectory control; Vibration
• ISSN: 1384-5640; 1573-272X
• DOI: 10.1007/s11044-020-09756-8

The design of a vehicle frame is largely dependent on the loads applied on the suspension and heavy parts mounting points. These loads can either be estimated through full analytical multibody dynamic simulations, or from semi-analytical simulations in which tire and road sub-models are not included and external vehicle loads, recorded during field testing, are used as inputs to the wheel hubs. Several semi-analytical methods exist, with various modeling architectures, yet, it is unclear how one method over another improves frame loads prediction accuracy. This study shows that a semi-analytical method that constrains the vehicle frame center of gravity movement along a recorded trajectory, using a control algorithm, leads to an accuracy within 1% for predicting frame loads, when compared to reference loads from a full analytical model. The control algorithm computes six degrees of freedom forces and moments applied at the vehicle center of gravity to closely follow the recorded vehicle trajectory. It is also shown that modeling the flexibility of the suspension arms and controlling wheel hub angular velocity both contribute in improving frame loads accuracy, while an acquisition frequency of 200 Hz appears to be sufficient to capture load dynamics for several maneuvers. Knowledge of these loads helps engineers perform appropriate dimensioning of vehicle structural components therefore ensuring their reliability under various driving conditions.