Loading…

Laser-Assisted Ultrafast Fabrication of Crystalline Ta-Doped TiO2 for High-Humidity-Processed Perovskite Solar Cells

A titanium dioxide (TiO2) compact film is a widely used electron transport layer (ETL) for n–i–p planar perovskite solar cells (PSCs). However, TiO2 sufferers from poor electrical conductivity, leading to high energy loss at the perovskite/ETL/transparent conductive oxide interface. Doping the TiO2...

Full description

Saved in:
Bibliographic Details
Published in:ACS applied materials & interfaces 2022-04, Vol.14 (13), p.15141-15153
Main Authors: Mo, Hongbo, Wang, Dong, Chen, Qian, Guo, Wei, Maniyarasu, Suresh, Thomas, Andrew G., Curry, Richard J., Li, Lin, Liu, Zhu
Format: Article
Language:English
Subjects:
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:A titanium dioxide (TiO2) compact film is a widely used electron transport layer (ETL) for n–i–p planar perovskite solar cells (PSCs). However, TiO2 sufferers from poor electrical conductivity, leading to high energy loss at the perovskite/ETL/transparent conductive oxide interface. Doping the TiO2 film with alkali- and transition-metal elements is an effective way to improve its electrical conductivity. The conventional method to prepare these metal-doped TiO2 films commonly requires time-consuming furnace treatments at 450–600 °C for 30 min to 3 h. Herein, a rapid one-step laser treatment is developed to enable doping of tantalum (Ta) in TiO2 (Ta-TiO2) and to simultaneously induce the crystallization of TiO2 films from its amorphous precursor to an anatase phase. The PSCs based on the Ta-TiO2 films treated with the optimized fiber laser (1070 nm) processing parameters (21 s with a peak processing temperature of 800–850 °C) show enhanced photovoltaic performance in comparison to that of the device fabricated using furnace-treated films at 500 °C for 30 min. The ambient-processed planar PSCs fabricated under high relative humidity (RH) of 50–70% display power conversion efficiencies (PCEs) of 18.34% and 16.04% for devices based on Cs0.1FA0.9PbI3 and CH3NH3PbI3 absorbers, respectively. These results are due to the improved physical and chemical properties of the Ta-TiO2 films treated by the optimal laser process in comparison to those for the furnace process. The laser process is rapid, simple, and potentially scalable to produce metal-doped TiO2 films for efficient PSCs.
ISSN:1944-8244
1944-8252
DOI:10.1021/acsami.1c24225