High Performance of Carbon Monoxide Gas Sensor Based on a Novel PEDOT:PSS/PPA Nanocomposite

• Published in: ACS omega 2022-07, Vol.7 (26), p.22492-22499
• Main Authors: Farea, Mohammed O., Alhadlaq, Hisham A., Alaizeri, ZabnAllah M., Ahmed, Abdullah A. A., Sallam, Mohyeddine O., Ahamed, Maqusood
• Format: Article
• Language: English
• ISSN: 2470-1343; 2470-1343
• DOI: 10.1021/acsomega.2c01664

In this work, the carbon monoxide (CO) detection property of poly­(3,4-ethylenedioxythiophene)-poly­(styrenesulfonate)/poly­(p-anisidine) (PEDOT:PSS/PPA) nanocomposite was systematically investigated at room temperature. The PEDOT:PSS/PPA nanocomposite was synthesized by the cost-effective “in situ chemical oxidation polymerization” technique. The electric, optical, spectroscopic, and structural properties of the as-prepared nanomaterials were analyzed with I–V, UV–vis, Raman, Fourier transform infrared (FTIR), and X-ray diffraction (XRD) spectroscopies. Topological investigations of materials were conducted by atomic force microscopy (AFM). The gas-sensing performance of the PEDOT:PSS/PPA and PEDOT:PSS nanocomposites toward CO gas in the concentration range of 50–300 ppm at room temperature was explored, and their performances were compared. The PEDOT:PSS/PPA sensor shows a perfectly linear response to different concentrations (50–300 ppm) of CO gas (R 2 = 0.9885), and the response time and recovery time of the CO gas sensor (100 ppm) can be about 58 and 61 s, respectively, showing high sensitivity to CO gas and rapid response recovery with outstanding stability. Thus, the PEDOT:PSS/PPA-based sensors, with their impressive sensing performance, may give assurance for future high-performance CO-sensing applications.