Comparative Studies of the Dielectric Properties of Polyester Imide Composite Membranes Containing Hydrophilic and Hydrophobic Mesoporous Silica Particles

• Published in: Materials 2022-12, Vol.16 (1), p.140
• Main Authors: Chen, Kuan-Ying, Yan, Minsi, Luo, Kun-Hao, Wei, Yen, Yeh, Jui-Ming
• Format: Article
• Language: English
• Subjects: Chemical synthesis; Comparative analysis; Comparative studies; Contact angle; Diamines; Dielectric properties; Dielectrics; Electric properties; Electrical conductivity; Ethanol; Fructose; Hydrophilicity; Hydrophobicity; Integrated circuits; Membranes; Metal foils; Permittivity; Polymers; Pore formation; Porous materials; Silica; Silicon dioxide; Sol-gel processes; Spectrum analysis; Surfactants
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma16010140

In this paper, comparative studies of hydrophilic and hydrophobic mesoporous silica particles (MSPs) on the dielectric properties of their derivative polyester imide (PEI) composite membranes were investigated. A series of hydrophilic and hydrophobic MSPs were synthesized with the base-catalyzed sol-gel process of TEOS, MTMS, and APTES at a distinctive feeding ratio with a non-surfactant template of D-(-)-Fructose as the pore-forming agent. Subsequently, the MSPs were blended with the diamine of APAB, followed by introducing the dianhydride of TAHQ with mechanical stirring for 24 h. The obtained viscous solution was subsequently coated onto a copper foil, 36 μm in thickness, followed by performing thermal imidization at specifically programmed heating. The dielectric constant of the prepared membranes was found to show an obvious trend: PEI containing hydrophilic MSPs > PEI > PEI containing hydrophobic MSPs. Moreover, the higher the loading of hydrophilic MSPs, the higher the value of the dielectric constant and loss tangent. On the contrary, the higher the loading of hydrophobic MSPs, the lower the value of the dielectric constant with an almost unchanged loss tangent.