Efficient Propylene Carbonate Synthesis from Urea and Propylene Glycol over Calcium Oxide-Magnesium Oxide Catalysts

• Published in: Materials 2023-01, Vol.16 (2), p.735
• Main Authors: Dang, Kavisha, Kumar, Navneet, Srivastava, Vimal Chandra, Park, Jinsub, Naushad, Mu
• Format: Article
• Language: English
• Subjects: By products; Calcium oxide; Carbonates; Catalysts; Chemical synthesis; Differential thermal analysis; Glycerol; Hydrocarbons; Laboratories; Lime; Magnesium; Magnesium oxide; Mixed oxides; Nitrates; Physiochemistry; Propylene; Radiation; Ratios; Selectivity; Solvents; Superconductors (materials); Ureas
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma16020735

A series of calcium oxide-magnesium oxide (CaO-MgO) catalysts were prepared under the effects of different precipitating agents and using varied Mg/Ca ratios. The physiochemical characteristics of the prepared catalysts were analyzed using XRD, FE-SEM, BET, FTIR, and TG/DTA techniques. Quantification of basic active sites present on the surface of the CaO-MgO catalysts was carried out using the Hammett indicator method. The as-prepared mixed oxide samples were tested for propylene carbonate (PC) synthesis through the alcoholysis of urea with propylene glycol (PG). The effects of the catalyst composition, catalyst dose, reaction temperature, and contact time on the PC yield and selectivity were investigated. The maximum PC yield of 96%, with high PC selectivity of 99% and a urea conversion rate of 96%, was attained at 160 °C using CaO-MgO catalysts prepared using a Mg/Ca ratio of 1 and Na CO as a precipitating agent. The best-performing catalysts also exhibited good reusability without any significant loss in PC selectivity. It is expected that the present study will provide useful information on the suitability of different precipitating agents with respect to the catalytic properties of the oxides of Ca and Mg and their application in the synthesis of organic carbonates.