Design Improvement of Four-Strand Continuous-Casting Tundish Using Physical and Numerical Simulation

• Published in: Materials 2023-01, Vol.16 (2), p.849
• Main Authors: Li, Quanhui, Qin, Bangming, Zhang, Jiangshan, Dong, Hongbiao, Li, Ming, Tao, Biao, Mao, Xinping, Liu, Qing
• Format: Article
• Language: English
• Subjects: Accuracy; Consistency; Continuous casting; Design; Design improvements; Design optimization; Experiments; Flow characteristics; Flow control; Flow distribution; Flow velocity; Fluid dynamics; Ladle metallurgy; Ladles; Liquid metals; Mathematical models; Metallurgical analysis; Metallurgy; Physical simulation; Response time; Retaining walls; Simulation; Steel making; Steel production; Tundishes; Turbulence models
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma16020849

The flow pattern is vital for the metallurgical performance of continuous casting tundishes. The purpose of this study was to design and optimize the flow characteristics inside a four-strand tundish. Numerical simulations and water model experiments were validated and utilized to investigate the flow behavior. The effect of different flow rates in the original tundish was evaluated; two modified retaining walls and a new ladle shroud were designed for optimization. The molten steel inside the original tundish tends to be more active as the flow rate increases from 3.8 L/min to 6.2 L/min, which results in a reduction in dead volume from 36.47% to 17.59% and better consistency between different outlets. The dead volume and outlet consistency inside the tundish are improved significantly when the modified walls are applied. The proper design of the diversion hole further enhances the plug volume from 6.39% to 13.44% of the tundish by forming an upstream circular flow in the casting zone. In addition, the new trumpet ladle shroud demonstrates an advantage in increasing the response time from 152.5 s to 167.5 s and alleviating the turbulence in the pouring zone, which is beneficial for clean steel production.