Sensitive micro-balances and a new method of weighing minute quantities

• Published in: Proceedings of the Royal Society of London. Series A, Containing papers of a mathematical and physical character Containing papers of a mathematical and physical character, 1909-09, Vol.82 (558), p.580-594
• Main Authors: Steele, Bertram Dillon, Grant, Kerr
• Format: Article
• Language: English
• Subjects: Air pressure; Bromides; Cements; Center of gravity; Glass; Light beams; Quartz; Radium; Shellac; Suspension systems
• ISSN: 0950-1207; 2053-9150
• DOI: 10.1098/rspa.1909.0063

In the course of experiments undertaken by the authors with a view to establishing a possible relation between the amount of ionisation produced at the surface of certain heated metals and the amount of oxidation of the metal, it became necessary to be able to measure changes of weight of the order of one-thousandth of a milligramme (1 X 10 -6gramme). A micro-balance of the Nernst type was accordingly constructed which possessed the requisite sensitiveness, but considerable difficulty was experienced in obtaining consistent readings with it, owing chiefly to the inconstancy of zero and the great variation of sensibility with load. This latter defect is an inevitable consequence of the fact that a restoring couple due to gravity, the magnitude of which varies, as in the ordinary balance, with the position of the centre of gravity of the system relative to its point of suspension, is superposed on the restoring torque of the quartz fibre. Attempts to minimise this trouble led finally to the conclusion that for the purpose in view better results were to be expected from a gravity balance of the ordinary type in which the required degree of sensitiveness should be attained by making the beam very light. As the maximum load which it was intended to use on the balance was less than half a gramme, this could be done without loss of proportionate rigidity.