Synthesis of activated carbon/polyaniline nanocomposites for enhanced CO adsorption

• Published in: RSC advances 2016-04, Vol.6 (42), p.35692-3574
• Main Authors: Khalili, S, Khoshandam, B, Jahanshahi, M
• Format: Article
• ISSN: 2046-2069
• DOI: 10.1039/c6ra00884d

Nanostructured polyaniline and its composites with pine cone-based activated carbon were synthesized by the oxidative polymerization of aniline in an aqueous solution of sulfuric acid and in the presence and absence of appropriate surfactant. The prepared activated carbon (AC), AC/polyaniline nanofiber composite (ACPANI-F) and AC/polyaniline nanosphere composites (ACPANI-S) were characterized by an N 2 adsorption isotherm at 77 K, elemental analysis, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and acidbase Boehm titration. The equilibrium adsorption of CO 2 on AC and nanocomposites were experimentally investigated via a volumetric technique at a temperature range of 298318 K and pressures up to 16 bar. The CO 2 adsorption capacity was remarkably increased from 1.91 mmol g 1 for AC to 2.69 mmol g 1 for ACPANI-F and 3.16 mmol g 1 for ACPANI-S at 25 C and 1 bar. The Sips isotherm presented a perfect fit to the CO 2 adsorption data on adsorbents. The relatively fast kinetic adsorption of CO 2 on the nanocomposites reflected the presence of more easily accessible adsorption sites toward CO 2 for nanocomposites than AC. The isosteric heat of adsorption at relatively low adsorbate coverage was 55 kJ mol 1 for ACPANI-F and 52 kJ mol 1 for ACPANI-S, indicating the physico-chemical characteristics and heterogeneity of the adsorbents surface. The selectivity of CO 2 over N 2 by AC, ACPANI-F and ACPANI-S (CO 2 :N 2 = 15:85, 298 K, 1 bar), predicted by the ideal adsorbed solution theory (IAST) model, achieved 1.53, 18.97 and 6.1, respectively. The results indicate that activated carbon/PANI nanocomposites can be used as an effective adsorbent for capture of CO 2 from flue gas. A new insight to investigate the potential applicability of different nanostructures of a PANI composite with activated carbon for CO 2 adsorption.