Introduction to Numerical Methods in Cooling System Simulation

The purpose of this paper is to present a numerical method for simulating single-phase or two-phase cooling systems, supposing available a model of the working fluid properties and of the cooling loop components. To make a computer simulation program one must be able to connect the analytical and ph...

Full description

Saved in:
Bibliographic Details
Main Authors: Festa, A, Chiarelli, C, Stramaccioni, D
Format: Report
Language:English
Online Access:Request full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by
cites
container_end_page
container_issue
container_start_page
container_title
container_volume
creator Festa, A
Chiarelli, C
Stramaccioni, D
description The purpose of this paper is to present a numerical method for simulating single-phase or two-phase cooling systems, supposing available a model of the working fluid properties and of the cooling loop components. To make a computer simulation program one must be able to connect the analytical and physical aspects of the problem. This leads to a selection of certain quantities representative of the whole state loop (state variables). Also a method must be conceived enabling one to find the values of these state variables with regard to the imposed initial and boundary conditions. An iterative method based on Newton-Raphson algorithm is used to solve the fluid-loop.
doi_str_mv 10.4271/871463
format report
fullrecord <record><control><sourceid>sae_AEUUQ</sourceid><recordid>TN_cdi_sae_technicalpapers_871463</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>871463</sourcerecordid><originalsourceid>FETCH-sae_technicalpapers_8714633</originalsourceid><addsrcrecordid>eNqNjr0OgjAYRb8YTcS_Z6gPgLa00rq4EI0OuuBOGqhSU1pCy-DbG6IP4HSXc04uwIrgDUs42QpOWEpHECWpEDFNEz6GCBMmYk72ZAoz718YU7LjLILDxYbOVX0ZtLMoOHTrG9XpUhp0VaF2lUfaosw5o-0T5W8fVINy3fRGDsYCJg9pvFr-dg7r0_GenWMvVRFUWdsh1cpWdb74HqP_MB8kijwe</addsrcrecordid><sourcetype>Publisher</sourcetype><iscdi>true</iscdi><recordtype>report</recordtype></control><display><type>report</type><title>Introduction to Numerical Methods in Cooling System Simulation</title><source>SAE Technical Papers, Back File B (1980-1989)</source><creator>Festa, A ; Chiarelli, C ; Stramaccioni, D</creator><creatorcontrib>Festa, A ; Chiarelli, C ; Stramaccioni, D</creatorcontrib><description>The purpose of this paper is to present a numerical method for simulating single-phase or two-phase cooling systems, supposing available a model of the working fluid properties and of the cooling loop components. To make a computer simulation program one must be able to connect the analytical and physical aspects of the problem. This leads to a selection of certain quantities representative of the whole state loop (state variables). Also a method must be conceived enabling one to find the values of these state variables with regard to the imposed initial and boundary conditions. An iterative method based on Newton-Raphson algorithm is used to solve the fluid-loop.</description><identifier>ISSN: 0148-7191</identifier><identifier>EISSN: 2688-3627</identifier><identifier>DOI: 10.4271/871463</identifier><language>eng</language><creationdate>1987</creationdate><rights>Copyright © 1987 Society of Automotive Engineers, Inc.</rights><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://doi.org/10.4271/871463$$EHTML$$P50$$Gsae$$H</linktohtml><link.rule.ids>777,781,26321,27906,79232,79236</link.rule.ids><linktorsrc>$$Uhttps://doi.org/10.4271/871463$$EView_record_in_SAE_Mobilus$$FView_record_in_$$GSAE_Mobilus</linktorsrc></links><search><creatorcontrib>Festa, A</creatorcontrib><creatorcontrib>Chiarelli, C</creatorcontrib><creatorcontrib>Stramaccioni, D</creatorcontrib><title>Introduction to Numerical Methods in Cooling System Simulation</title><description>The purpose of this paper is to present a numerical method for simulating single-phase or two-phase cooling systems, supposing available a model of the working fluid properties and of the cooling loop components. To make a computer simulation program one must be able to connect the analytical and physical aspects of the problem. This leads to a selection of certain quantities representative of the whole state loop (state variables). Also a method must be conceived enabling one to find the values of these state variables with regard to the imposed initial and boundary conditions. An iterative method based on Newton-Raphson algorithm is used to solve the fluid-loop.</description><issn>0148-7191</issn><issn>2688-3627</issn><fulltext>true</fulltext><rsrctype>report</rsrctype><creationdate>1987</creationdate><recordtype>report</recordtype><sourceid>AEUUQ</sourceid><recordid>eNqNjr0OgjAYRb8YTcS_Z6gPgLa00rq4EI0OuuBOGqhSU1pCy-DbG6IP4HSXc04uwIrgDUs42QpOWEpHECWpEDFNEz6GCBMmYk72ZAoz718YU7LjLILDxYbOVX0ZtLMoOHTrG9XpUhp0VaF2lUfaosw5o-0T5W8fVINy3fRGDsYCJg9pvFr-dg7r0_GenWMvVRFUWdsh1cpWdb74HqP_MB8kijwe</recordid><startdate>19870701</startdate><enddate>19870701</enddate><creator>Festa, A</creator><creator>Chiarelli, C</creator><creator>Stramaccioni, D</creator><scope>AEUUQ</scope></search><sort><creationdate>19870701</creationdate><title>Introduction to Numerical Methods in Cooling System Simulation</title><author>Festa, A ; Chiarelli, C ; Stramaccioni, D</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-sae_technicalpapers_8714633</frbrgroupid><rsrctype>reports</rsrctype><prefilter>reports</prefilter><language>eng</language><creationdate>1987</creationdate><toplevel>online_resources</toplevel><creatorcontrib>Festa, A</creatorcontrib><creatorcontrib>Chiarelli, C</creatorcontrib><creatorcontrib>Stramaccioni, D</creatorcontrib><collection>SAE Technical Papers, Back File B (1980-1989)</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Festa, A</au><au>Chiarelli, C</au><au>Stramaccioni, D</au><format>book</format><genre>unknown</genre><ristype>RPRT</ristype><btitle>Introduction to Numerical Methods in Cooling System Simulation</btitle><date>1987-07-01</date><risdate>1987</risdate><issn>0148-7191</issn><eissn>2688-3627</eissn><abstract>The purpose of this paper is to present a numerical method for simulating single-phase or two-phase cooling systems, supposing available a model of the working fluid properties and of the cooling loop components. To make a computer simulation program one must be able to connect the analytical and physical aspects of the problem. This leads to a selection of certain quantities representative of the whole state loop (state variables). Also a method must be conceived enabling one to find the values of these state variables with regard to the imposed initial and boundary conditions. An iterative method based on Newton-Raphson algorithm is used to solve the fluid-loop.</abstract><doi>10.4271/871463</doi></addata></record>
fulltext fulltext_linktorsrc
identifier ISSN: 0148-7191
ispartof
issn 0148-7191
2688-3627
language eng
recordid cdi_sae_technicalpapers_871463
source SAE Technical Papers, Back File B (1980-1989)
title Introduction to Numerical Methods in Cooling System Simulation
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-17T22%3A59%3A01IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-sae_AEUUQ&rft_val_fmt=info:ofi/fmt:kev:mtx:book&rft.genre=unknown&rft.btitle=Introduction%20to%20Numerical%20Methods%20in%20Cooling%20System%20Simulation&rft.au=Festa,%20A&rft.date=1987-07-01&rft.issn=0148-7191&rft.eissn=2688-3627&rft_id=info:doi/10.4271/871463&rft_dat=%3Csae_AEUUQ%3E871463%3C/sae_AEUUQ%3E%3Cgrp_id%3Ecdi_FETCH-sae_technicalpapers_8714633%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true