Loading…
PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS
O presente trabalho teve como objetivo desenvolver painéis de partículas aglomeradas de baixa densidade com casca de amendoim, fibra da casca do coco-verde (híbrido) e resina poliuretana bicomponente à base de óleo de mamona. Os painéis experimentais foram fabricados com partículas de até 8 mm de co...
Saved in:
| Published in: | Ciência florestal 2015-10, Vol.25 (3), p.721-730 |
|---|---|
| Main Authors: | , , , , |
| Format: | Article |
| Language: | eng ; por |
| Subjects: | |
| Online Access: | Get full text |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| cited_by | |
|---|---|
| cites | |
| container_end_page | 730 |
| container_issue | 3 |
| container_start_page | 721 |
| container_title | Ciência florestal |
| container_volume | 25 |
| creator | Cravo, Julio Cesar Machado Sartori, Diogo de Lucca Fiorelli, Juliano Balieiro, Julio Cesar de Carvalho Junior, Holmer Savastano |
| description | O presente trabalho teve como objetivo desenvolver painéis de
partículas aglomeradas de baixa densidade com casca de amendoim,
fibra da casca do coco-verde (híbrido) e resina poliuretana
bicomponente à base de óleo de mamona. Os painéis
experimentais foram fabricados com partículas de até 8 mm de
comprimento e 15% de resina poliuretana. A prensagem foi realizada a
5,0 MPa, por 10 minutos, a uma temperatura de 100°C. Foram
determinadas as propriedades físico-mecânicas do material,
seguindo as recomendações da norma ABNT 14810:2006. Os
resultados demonstraram que o desempenho mecânico que atende
às recomendações estabelecidas pela normativa ANSI
A208.1-1999 e ABNT 14.810-2:2006.
The present study aimed to develop particleboards of low density with
peanut shell, coconut husk fiber green (hybrid) and two-component
polyurethane resin based on castor oil. The experimental panels were
manufactured with particles up to 8mm and 15% polyurethane resin. The
pressing was carried out at 5.0 MPa for 10 minutes at 100°C of
temperature. The physical-mechanical properties of the material were
determined as recommended by ABNT 14810:2006. The results demonstrated
a mechanical performance that meets the recommendations established by
normative ANSI A208.1-1999 and ABNT 14.810-2:2006. |
| doi_str_mv | 10.5902/1980509819675 |
| format | article |
| fullrecord | <record><control><sourceid>scielo_cross</sourceid><recordid>TN_cdi_scielo_journals_S1980_50982015000300721</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><scielo_id>S1980_50982015000300721</scielo_id><sourcerecordid>S1980_50982015000300721</sourcerecordid><originalsourceid>FETCH-LOGICAL-b2255-16e2895e20b15782b36f2957d6091be694fbfd3ddc128f417136cd68baf55ec33</originalsourceid><addsrcrecordid>eNpVUMtqwzAQFKWFpmmPvecHnO5KlmwdTewmBjcudnIWliyBQxoXmx76Ef2q_lhl0geFhWWHmR1mCLlHWHIJ9AFlDBxkjFJE_ILMpjuYgEsyAwQWSMnDa3IzjgcArxBsRpbPSb7NikWyLsqnrErScpFmiyqrPz_SfVl7vCrzbbqvd1We5PUtuXLNcbR333tO9o_ZbrUJinKdr5Ii0JRyHqCwNJbcUtDIo5hqJhyVPGoFSNRWyNBp17K2NUhjF2KETJhWxLpxnFvD2Jwsz39H09ljrw7923DyhqqeQqkpFAXkAMAAIopeEJwFZujHcbBOvQ7dSzO8K_R03476186fge76Y3eyv3QzdI36AY3z421ExL4Ax5tgHA</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS</title><source>SciELO</source><source>Alma/SFX Local Collection</source><creator>Cravo, Julio Cesar Machado ; Sartori, Diogo de Lucca ; Fiorelli, Juliano ; Balieiro, Julio Cesar de Carvalho ; Junior, Holmer Savastano</creator><creatorcontrib>Cravo, Julio Cesar Machado ; Sartori, Diogo de Lucca ; Fiorelli, Juliano ; Balieiro, Julio Cesar de Carvalho ; Junior, Holmer Savastano</creatorcontrib><description>O presente trabalho teve como objetivo desenvolver painéis de
partículas aglomeradas de baixa densidade com casca de amendoim,
fibra da casca do coco-verde (híbrido) e resina poliuretana
bicomponente à base de óleo de mamona. Os painéis
experimentais foram fabricados com partículas de até 8 mm de
comprimento e 15% de resina poliuretana. A prensagem foi realizada a
5,0 MPa, por 10 minutos, a uma temperatura de 100°C. Foram
determinadas as propriedades físico-mecânicas do material,
seguindo as recomendações da norma ABNT 14810:2006. Os
resultados demonstraram que o desempenho mecânico que atende
às recomendações estabelecidas pela normativa ANSI
A208.1-1999 e ABNT 14.810-2:2006.
The present study aimed to develop particleboards of low density with
peanut shell, coconut husk fiber green (hybrid) and two-component
polyurethane resin based on castor oil. The experimental panels were
manufactured with particles up to 8mm and 15% polyurethane resin. The
pressing was carried out at 5.0 MPa for 10 minutes at 100°C of
temperature. The physical-mechanical properties of the material were
determined as recommended by ABNT 14810:2006. The results demonstrated
a mechanical performance that meets the recommendations established by
normative ANSI A208.1-1999 and ABNT 14.810-2:2006.</description><identifier>ISSN: 0103-9954</identifier><identifier>ISSN: 1980-5098</identifier><identifier>EISSN: 1980-5098</identifier><identifier>DOI: 10.5902/1980509819675</identifier><language>eng ; por</language><publisher>Centro de Pesquisas Florestais - CEPEF, Departamento de Ciências Florestais - DCFL, Programa de Pós Graduação em Engenharia Florestal - PPGEF</publisher><subject>casca de amendoim ; coconut fiber ; ECOLOGY ; ENVIRONMENTAL STUDIES ; fibra de coco ; FORESTRY ; painéis aglomerados ; particleboard ; peanut hulls ; polyurethane resin ; resina poliuretana</subject><ispartof>Ciência florestal, 2015-10, Vol.25 (3), p.721-730</ispartof><rights>Copyright 2015 - Ciência Florestal</rights><rights>This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>230,314,780,784,885,24150,27924,27925</link.rule.ids></links><search><creatorcontrib>Cravo, Julio Cesar Machado</creatorcontrib><creatorcontrib>Sartori, Diogo de Lucca</creatorcontrib><creatorcontrib>Fiorelli, Juliano</creatorcontrib><creatorcontrib>Balieiro, Julio Cesar de Carvalho</creatorcontrib><creatorcontrib>Junior, Holmer Savastano</creatorcontrib><title>PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS</title><title>Ciência florestal</title><addtitle>Ciênc. Florest</addtitle><description>O presente trabalho teve como objetivo desenvolver painéis de
partículas aglomeradas de baixa densidade com casca de amendoim,
fibra da casca do coco-verde (híbrido) e resina poliuretana
bicomponente à base de óleo de mamona. Os painéis
experimentais foram fabricados com partículas de até 8 mm de
comprimento e 15% de resina poliuretana. A prensagem foi realizada a
5,0 MPa, por 10 minutos, a uma temperatura de 100°C. Foram
determinadas as propriedades físico-mecânicas do material,
seguindo as recomendações da norma ABNT 14810:2006. Os
resultados demonstraram que o desempenho mecânico que atende
às recomendações estabelecidas pela normativa ANSI
A208.1-1999 e ABNT 14.810-2:2006.
The present study aimed to develop particleboards of low density with
peanut shell, coconut husk fiber green (hybrid) and two-component
polyurethane resin based on castor oil. The experimental panels were
manufactured with particles up to 8mm and 15% polyurethane resin. The
pressing was carried out at 5.0 MPa for 10 minutes at 100°C of
temperature. The physical-mechanical properties of the material were
determined as recommended by ABNT 14810:2006. The results demonstrated
a mechanical performance that meets the recommendations established by
normative ANSI A208.1-1999 and ABNT 14.810-2:2006.</description><subject>casca de amendoim</subject><subject>coconut fiber</subject><subject>ECOLOGY</subject><subject>ENVIRONMENTAL STUDIES</subject><subject>fibra de coco</subject><subject>FORESTRY</subject><subject>painéis aglomerados</subject><subject>particleboard</subject><subject>peanut hulls</subject><subject>polyurethane resin</subject><subject>resina poliuretana</subject><issn>0103-9954</issn><issn>1980-5098</issn><issn>1980-5098</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNpVUMtqwzAQFKWFpmmPvecHnO5KlmwdTewmBjcudnIWliyBQxoXmx76Ef2q_lhl0geFhWWHmR1mCLlHWHIJ9AFlDBxkjFJE_ILMpjuYgEsyAwQWSMnDa3IzjgcArxBsRpbPSb7NikWyLsqnrErScpFmiyqrPz_SfVl7vCrzbbqvd1We5PUtuXLNcbR333tO9o_ZbrUJinKdr5Ii0JRyHqCwNJbcUtDIo5hqJhyVPGoFSNRWyNBp17K2NUhjF2KETJhWxLpxnFvD2Jwsz39H09ljrw7923DyhqqeQqkpFAXkAMAAIopeEJwFZujHcbBOvQ7dSzO8K_R03476186fge76Y3eyv3QzdI36AY3z421ExL4Ax5tgHA</recordid><startdate>20151014</startdate><enddate>20151014</enddate><creator>Cravo, Julio Cesar Machado</creator><creator>Sartori, Diogo de Lucca</creator><creator>Fiorelli, Juliano</creator><creator>Balieiro, Julio Cesar de Carvalho</creator><creator>Junior, Holmer Savastano</creator><general>Centro de Pesquisas Florestais - CEPEF, Departamento de Ciências Florestais - DCFL, Programa de Pós Graduação em Engenharia Florestal - PPGEF</general><general>Universidade Federal de Santa Maria</general><scope>RBI</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>GPN</scope></search><sort><creationdate>20151014</creationdate><title>PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS</title><author>Cravo, Julio Cesar Machado ; Sartori, Diogo de Lucca ; Fiorelli, Juliano ; Balieiro, Julio Cesar de Carvalho ; Junior, Holmer Savastano</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-b2255-16e2895e20b15782b36f2957d6091be694fbfd3ddc128f417136cd68baf55ec33</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; por</language><creationdate>2015</creationdate><topic>casca de amendoim</topic><topic>coconut fiber</topic><topic>ECOLOGY</topic><topic>ENVIRONMENTAL STUDIES</topic><topic>fibra de coco</topic><topic>FORESTRY</topic><topic>painéis aglomerados</topic><topic>particleboard</topic><topic>peanut hulls</topic><topic>polyurethane resin</topic><topic>resina poliuretana</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Cravo, Julio Cesar Machado</creatorcontrib><creatorcontrib>Sartori, Diogo de Lucca</creatorcontrib><creatorcontrib>Fiorelli, Juliano</creatorcontrib><creatorcontrib>Balieiro, Julio Cesar de Carvalho</creatorcontrib><creatorcontrib>Junior, Holmer Savastano</creatorcontrib><collection>Bioline International Open Access</collection><collection>CrossRef</collection><collection>SciELO</collection><jtitle>Ciência florestal</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Cravo, Julio Cesar Machado</au><au>Sartori, Diogo de Lucca</au><au>Fiorelli, Juliano</au><au>Balieiro, Julio Cesar de Carvalho</au><au>Junior, Holmer Savastano</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS</atitle><jtitle>Ciência florestal</jtitle><addtitle>Ciênc. Florest</addtitle><date>2015-10-14</date><risdate>2015</risdate><volume>25</volume><issue>3</issue><spage>721</spage><epage>730</epage><pages>721-730</pages><issn>0103-9954</issn><issn>1980-5098</issn><eissn>1980-5098</eissn><abstract>O presente trabalho teve como objetivo desenvolver painéis de
partículas aglomeradas de baixa densidade com casca de amendoim,
fibra da casca do coco-verde (híbrido) e resina poliuretana
bicomponente à base de óleo de mamona. Os painéis
experimentais foram fabricados com partículas de até 8 mm de
comprimento e 15% de resina poliuretana. A prensagem foi realizada a
5,0 MPa, por 10 minutos, a uma temperatura de 100°C. Foram
determinadas as propriedades físico-mecânicas do material,
seguindo as recomendações da norma ABNT 14810:2006. Os
resultados demonstraram que o desempenho mecânico que atende
às recomendações estabelecidas pela normativa ANSI
A208.1-1999 e ABNT 14.810-2:2006.
The present study aimed to develop particleboards of low density with
peanut shell, coconut husk fiber green (hybrid) and two-component
polyurethane resin based on castor oil. The experimental panels were
manufactured with particles up to 8mm and 15% polyurethane resin. The
pressing was carried out at 5.0 MPa for 10 minutes at 100°C of
temperature. The physical-mechanical properties of the material were
determined as recommended by ABNT 14810:2006. The results demonstrated
a mechanical performance that meets the recommendations established by
normative ANSI A208.1-1999 and ABNT 14.810-2:2006.</abstract><pub>Centro de Pesquisas Florestais - CEPEF, Departamento de Ciências Florestais - DCFL, Programa de Pós Graduação em Engenharia Florestal - PPGEF</pub><doi>10.5902/1980509819675</doi><tpages>10</tpages><oa>free_for_read</oa></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0103-9954 |
| ispartof | Ciência florestal, 2015-10, Vol.25 (3), p.721-730 |
| issn | 0103-9954 1980-5098 1980-5098 |
| language | eng ; por |
| recordid | cdi_scielo_journals_S1980_50982015000300721 |
| source | SciELO; Alma/SFX Local Collection |
| subjects | casca de amendoim coconut fiber ECOLOGY ENVIRONMENTAL STUDIES fibra de coco FORESTRY painéis aglomerados particleboard peanut hulls polyurethane resin resina poliuretana |
| title | PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS |
| url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-28T14%3A39%3A08IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-scielo_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=PAINEL%20AGLOMERADO%20DE%20RES%C3%8DDUOS%20AGROINDUSTRIAIS&rft.jtitle=Cie%CC%82ncia%20florestal&rft.au=Cravo,%20Julio%20Cesar%20Machado&rft.date=2015-10-14&rft.volume=25&rft.issue=3&rft.spage=721&rft.epage=730&rft.pages=721-730&rft.issn=0103-9954&rft.eissn=1980-5098&rft_id=info:doi/10.5902/1980509819675&rft_dat=%3Cscielo_cross%3ES1980_50982015000300721%3C/scielo_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-b2255-16e2895e20b15782b36f2957d6091be694fbfd3ddc128f417136cd68baf55ec33%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rft_scielo_id=S1980_50982015000300721&rfr_iscdi=true |