Properties of fired clay brick incorporating with sewage sludge waste

• Main Authors: Kadir, Aeslina Abdul, Salim, Nurul Salhana Abdul, Sarani, Noor Amira, Rahmat, Nur Aqma Izurin, Abdullah, Mohd Mustafa Al Bakri
• Format: Conference Proceeding
• Language: English
• ISSN: 0094-243X; 1551-7616
• DOI: 10.1063/1.5002344

The production of sludge in wastewater treatment plant is about to increase every year and most of the sludge was directly disposed to landfill. In addition, the constraint to treat sludge is very high in cost and time- consuming could be disadvantages to the responsible parties. Therefore, this research was conducted to utilize sludge produced from the wastewater treatment plant into fired clay brick as one of the alternatives of disposal method. In this study, the research attempt to incorporate sewage sludge waste (SSW) into fired clay brick. The sewage sludge brick (SSB) mixtures were incorporated with 0%, 1%, 5%, 10%, and 20% of SSW. The manufactured bricks were fired at 1050°C with heating rate of 1°C/min. Physical and mechanical properties test were conducted such as shrinkage, density, water absorption and compressive strength. As the conclusion, brick with utilization 5% of SSW is acceptable to produce good quality of brick. This study shows by using SSW in fired clay brick could be an alternative method to dispose of the SSW and also could act as a replacement material for brick manufacturing with appropriate mix and design.