Shear horizontal wave propagation along a periodic metal grating surface of a magneto-electro-elastic substrate

• Published in: Journal of applied physics 2019-04, Vol.125 (16)
• Main Authors: Pang, Yu, Xu, Chunyu, Ge, Tai, Feng, Wenjie
• Format: Article
• Language: English
• Subjects: Aluminum; Applied physics; Cobalt ferrites; Mathematical analysis; Metal strips; Periodic variations; SH waves; Strip; Substrates; Surface acoustic wave devices; Surface acoustic waves; Surface waves; Wave dispersion; Wave propagation; Waves
• ISSN: 0021-8979; 1089-7550
• DOI: 10.1063/1.5079273

This paper analyzes shear horizontal (SH) waves propagating in thin metal strips deposited periodically onto the surface of a magneto-electro-elastic (MEE) substrate. The MEE substrate is assumed to be a transversely isotropic crystal with 6 mm symmetry or a hexagonal (6 mm) crystal. A field analysis method, which is based on the Bloch–Floquet theory and the coupled equations of wave motion, is employed to derive the dispersion equations and wave mode shapes. Numerical examples are presented for an MEE composite (PZT4/CoFe2O4) and an aluminum (Al) strip. For comparison, different constituent ratios of PZT4/CoFe2O4 are considered. The effect of the ratios of strip height and width to grating periodicity on frequencies, phase velocities, as well as wave mode shapes is discussed in detail. The results show that there is a bandgap at the resonance condition when the grating periodicity matches the wavelength of the SH surface wave. This metal grating surface can trap SH surface waves by slowing the SH waves. The wave mode shapes indicate that the SH surface waves are trapped mainly on these metal strips. As the ratio of strip height to grating periodicity increases, the trapping effect is more pronounced and the gap becomes wider. The ratio of strip width to grating periodicity significantly affects the behavior of SH surface waves. The present results are relevant in the application of MEE surface acoustic wave resonators.