First mushroom-shaped adhesive microstructure： A review

• Published in: Theoretical and applied mechanics letters 2012-01, Vol.2 (1), p.40-43, Article 014008
• Main Authors: Heepe, L., Kovalev, A.E., Varenberg, M., Tuma, J., Gorb, S.N.
• Format: Article
• Language: English
• Subjects: adhesion; bio-inspired; biomimetics; contact mechanics; friction; gecko; polymer; 工业生产; 微观结构; 控制测量; 摩擦性能; 粘接性能; 粘滑运动; 胶粘剂; 蘑菇
• ISSN: 2095-0349; 2095-0349
• DOI: 10.1063/2.1201408

This letter reviews the adhesive and frictional properties of the first mushroom-shaped adhesive microstructure (MSAMS), which has come a long way from inspiration by the attachment devices evolved in beetles to a large-scale industrial production. It was shown to have an that about twice higher pull-off force compared to a smooth control made from the same material measured on smooth substrates. Pull-off forces measured underwater are even higher than those in air. Moreover, it retained adhesive performance over thousands of attachment cycles and initial adhesive capability could be recovered by washing after being contaminated. In shearing, MSAMS exhibits reduced and stabilized friction in comparison with a smooth control, which demonstrated pronounced stick-slip motion, and shows zero pull-off force in a sheared state, allowing the adhesion to be switched on and off. The presence of a fluid in the contact zone showed adhesion enhancement on both smooth and rough substrates. All these features lead us to conclude that MSAMS may have practical potential in a variety of applications.