Research on acoustic emission multi-parameter characteristics in the failure process of imitation steel fiber reinforced concrete

• Published in: Physics of fluids (1994) 2023-10, Vol.35 (10)
• Main Authors: Li, Haotian, Li, Xuelong, Fu, Jianhua, Gao, Zhenliang, Chen, Peng, Zhang, Zhibo
• Format: Article
• Language: English
• Subjects: Acoustic emission testing; Acoustic measurement; Acoustics; Damage; Emission analysis; Entropy; Failure; Fluid dynamics; Inhomogeneity; Mathematical analysis; Parameters; Physics; Precursors; Reinforced concrete; Reinforcing steels; Steel fiber reinforced concretes; Steel fibers; Structural health monitoring
• ISSN: 1070-6631; 1089-7666
• DOI: 10.1063/5.0170179

Studies of the damage process of fiber-reinforced concrete through acoustic emission are very significant for concrete structural health monitoring. In this study, three specifications of fiber concrete and one group of plain concrete were prepared to carry out the uniaxial compression test and acoustic emission monitoring test; then, b value, entropy H, and variance D, were calculated and compared their characterization effect. The main results showed that fibers increased the degree of internal inhomogeneity of the specimens, making the acoustic emission response more active. For every 2% increase in fiber content, the total acoustic emission count and energy increased by about 20%, the acoustic emission precursor parameters changed more significantly, the b-value decreased by 2%–10%, the entropy and variance increased by 3%–5% and 2%–22%, respectively. The variation of b value, entropy, and variance can be divided into three phases: initial rising/falling, unstable transition, and fluctuating slow-rising/falling, which had good consistency with the stress curve. According to the linear fitting results, the b value that dropped below the envelope in the post-peak phase can be taken as the damage precursor point, and its accuracy and generalizability were better. The entropy at the failure moment was around 0.6, but the value close to or above 0.6 occurred several times during the damage process, and taking the entropy value beyond the envelope range as the failure precursor point may lead to the error early warning. The variance was slightly worse to distinguish small-scale fracture, but was not susceptible to high-energy events. Therefore, variances close to 5 or beyond the envelope interval can be regarded as the precursor of final failure. As for studying concrete damage processes with acoustic emission, it is suggested to combine multiple parameters for comprehensive discrimination.