Robust downhole ultrasonic pitch-catch measurements of compressional and shear wave velocities

• Published in: The Journal of the Acoustical Society of America 2018-09, Vol.144 (3), p.1759-1759
• Main Authors: Sakiyama, Naoki, Deger, Evgeniya, Hori, Hiroshi, Houshuyama, Shin'ichi, Oshima, Atsushi, Nakajima, Hiroshi
• Format: Article
• Language: English
• ISSN: 0001-4966; 1520-8524
• DOI: 10.1121/1.5067785

Probing acoustic wave velocities of earth formations, both in azimuth and radius, is important when evaluating anisotropy and/or heterogeneity of the formations. A conventional approach for evaluating these complex formations is to employ a sonic logging tool that operates from approximately 0.1 kHz to 20 kHz with an approximately 600 mm spatial resolution. With these standard sonic tools, evaluating formation acoustic wave velocities with an order smaller spatial resolution to detect thin beds and/or azimuthal variation of formation properties is very challenging. To overcome this challenge, this paper discusses an ultrasonic pitch-catch measurement that can be applied to a downhole acoustic tool. Downhole conditions are typically harsh, especially for ultrasonic frequencies. Thus, a robust measurement system is required that maximizes the signal-to-noise ratio. One of the ways to do this is to minimize the distance between the transmitter and the array receiver (and the receiver-receiver spacings of the array). Numerical modeling corroborated by experimental study indicates such a measurement system can primarily detect refracted compressional waves and surface mode waves related to the pseudo-Rayleigh mode. Characteristics of the pseudo-Rayleigh mode measured with such system and a way to estimate shear wave velocity from the measured mode are discussed.