Analysis of shielding of propeller noise using beamforming and predictions

• Published in: The Journal of the Acoustical Society of America 2019-08, Vol.146 (2), p.1085-1098
• Main Authors: Vieira, Ana, Snellen, Mirjam, Malgoezar, Anwar M. N., Merino-Martinez, Roberto, Simons, Dick G.
• Format: Article
• Language: English
• ISSN: 0001-4966; 1520-8524
• DOI: 10.1121/1.5121398

Engine noise shielding is an important measure towards low-noise aircraft configurations. Such designs are supported by prediction tools that indicate high values for shielding of engine noise. Most prediction models approximate the complex nature of engine noise to simple noise sources such as monopoles or dipoles. This work compares predictions of noise shielding with experiments using different noise sources and shielding body geometries. The experiments considered in this work concern a monopole source shielded by a flat plate and a NACA 64-008 A wing, and a propeller shielded by the same wing. Comparisons between models and measurements are made by analysis of noise levels at individual microphones and using conventional beamforming. Results show that for the monopole cases the model predictions are in agreement with the experimental data, with an average deviation of 2–3 dB. The curvature of the leading edge of the wing influences the noise shielding results. The measured values of noise shielding of propeller noise are lower than those measured for the omni-directional source. Different types of source directivity are used to approximate the propeller in the predictions: monopole, dipole and a multi-source. The dipole approximation shows the best agreement with the experiments for the case of the propeller.