Extreme water-hammer pressure during one-after-another load shedding in pumped-storage stations

• Published in: Renewable energy 2016-12, Vol.99, p.35-44
• Main Authors: Zeng, Wei, Yang, Jiandong, Tang, Renbo, Yang, Weijia
• Format: Article
• Language: English
• Subjects: Hydraulic connection; Model test; OAA load shedding; Pump-turbine; Pumped-storage station; Transient pressure
• ISSN: 0960-1481; 1879-0682; 1879-0682
• DOI: 10.1016/j.renene.2016.06.030

The intermittent and unpredictable wind and solar power leads to the frequent transient processing of pumped-storage stations, increasing the probability of load shedding. When one turbine sheds its load, the other turbines in the same hydraulic unit become overloaded and may shed their loads, which is referred to as a “one-after-another (OAA)” load-shedding process. An extremely high water-hammer pressure (WHP), namely, high spiral case pressure (SCP) or low draft tube pressure (DTP), may arise in this case, directly threatening the safety of the PSS. The objective of this study was to theoretically determine the hydraulic connections between the turbines and reveal the mechanism of the rapid rise in the WHP under the OAA load-shedding conditions. Theoretical derivations inferred that the drastic pressure changes in a trail shedding turbine (TST) are caused by the hydraulic connection with the lead shedding turbine (LST) in the S region. Furthermore, numerical simulations and model experiments were performed for the OAA load-shedding process, which confirmed the validity of the theoretical analysis. Finally, an analysis was conducted on the distribution of the water inertia in the upstream and downstream branch pipes, and engineering measures were proposed to guarantee the safe operation of PSS systems. •The possibility of the extreme WHP under OAA load-shedding conditions was firstly confirmed by experiments.•The extreme WHP was caused by pump-turbine S-shaped characteristics and inter-turbine hydraulic connections.•An engineering measure was proposed to improve the draft tube vacuum under OAA load-shedding conditions.