Self powered neutron detectors as in-core detectors for Sodium-cooled Fast Reactors

• Published in: Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment Accelerators, spectrometers, detectors and associated equipment, 2017-07, Vol.860, p.6-12
• Main Authors: Verma, V., Barbot, L., Filliatre, P., Hellesen, C., Jammes, C., Svärd, S. Jacobsson
• Format: Article
• Language: English
• Subjects: Core monitoring; In-core detection; Instrumentation; Self powered neutron detector; Sodium cooled fast reactors
• ISSN: 0168-9002; 1872-9576; 1872-9576
• DOI: 10.1016/j.nima.2017.04.011

Neutron flux monitoring system forms an integral part of the design of a Generation IV sodium cooled fast reactor. Diverse possibilities of detector system installation must be studied for various locations in the reactor vessel in order to detect any perturbations in the core. Results from a previous paper indicated that it is possible to detect changes in neutron source distribution initiated by an inadvertent withdrawal of outer control rod with in-vessel fission chambers located azimuthally around the core. It is, however, not possible to follow inner control rod withdrawal and precisely know the location of the perturbation in the core. Hence the use of complimentary in-core detectors coupled with the peripheral fission chambers is proposed to enable robust core monitoring across the radial direction. In this paper, we assess the feasibility of using self-powered neutron detectors (SPNDs) as in-core detectors in fast reactors for detecting local changes in the power distribution when the reactor is operated at nominal power. We study the neutron and gamma contributions to the total output current of the detector modelled with Platinum as the emitter material. It is shown that this SPND placed in an SFR-like environment would give a sufficiently measurable prompt neutron induced current of the order of 600nA/m. The corresponding induced current in the connecting cable is two orders of magnitude lower and can be neglected. This means that the SPND can follow in-core power fluctuations. This validates the operability of an SPND in an SFR-like environment. •Studied possibility of using SPNDs as in-core detectors in SFRs.•Study done to detect local power profile changes when reactor is at nominal power.•SPND with a Pt-emitter gives measurable prompt current of the order of 600nA/m.•Dominant proportion of prompt response is maintained throughout the operation.•Detector signal gives dynamic information on the power fluctuations.