Thermochemical non-equilibrium flow characteristics of high Mach number inlet in a wide operation range

• Published in: Chinese journal of aeronautics 2023-12, Vol.36 (12), p.164-184
• Main Authors: DAI, Chunliang, SUN, Bo, YUE, Lianjie, ZHOU, Shengbing, ZHUO, Changfei, ZHOU, Changsheng, YU, Jianyi
• Format: Article
• Language: English
• ISSN: 1000-9361
• DOI: 10.1016/j.cja.2023.07.033

The high-temperature non-equilibrium effect is a novel and significant issue in the flows over a high Mach number(above Mach 8)air-breathing vehicle.Thus,this study attempts to inves-tigate the high-temperature non-equilibrium flows of a curved compression two-dimensional scram-jet inlet at Mach 8 to 12 utilizing the two-dimensional non-equilibrium RANS calculations.Notably,the thermochemical non-equilibrium gas model can predict the actual high-temperature flows,and the numerical results of the other four thermochemical gas models are only used for com-parative analysis.Firstly,the thermochemical non-equilibrium flow fields and work performance of the inlet at Mach 8 to 12 are analyzed.Then,the influences of high-temperature non-equilibrium effects on the starting characteristics of the inlet are investigated.The results reveal that a large sep-aration bubble caused by the cowl shock/lower wall boundary layer interaction appears upstream of the shoulder,at Mach 8.The separation zone size is smaller,and its location is closer to the down-stream area while the thermal process changes from frozen to non-equilibrium and then to equilib-rium.With the increase of inflow Mach number,the thermochemical non-equilibrium effects in the whole inlet flow field gradually strengthen,so their influences on the overall work performance of the high Mach number inlet are more obvious.The vibrational relaxation or thermal non-equilibrium effects can yield more visible influences on the inlet performance than the chemical non-equilibrium reactions.The inlet in the thermochemical non-equilibrium flow can restart more easily than that in the thermochemical frozen flow.This work should provide a basis for the design and starting ability prediction of the high Mach number inlet in the wide operation range.