Synthesis and Assessment of a CO2‐Switchable Foaming Agent Used in Drilling Fluids for Underbalanced Drilling

• Published in: Journal of surfactants and detergents 2018-05, Vol.21 (3), p.375-387
• Main Authors: Su, Junlin, Dong, Wenxin, Zhou, Sulin, Deng, Mingyi
• Format: Article
• Language: English
• Subjects: Effectiveness; Foam systems; Foaming agent; Formula optimization; Resistance evaluation; Self‐circulation
• ISSN: 1097-3958; 1558-9293
• DOI: 10.1002/jsde.12029

In underbalanced drilling, a switchable foam fluid is essential to reduce the drilling cost. A switchable foaming agent was synthesized by carbonyl–amine condensation and characterized by Fourier transform infrared and 1H nuclear magnetic resonance (NMR) spectroscopy. Thermogravimetric analysis and differential scanning calorimetry showed that the tolerable temperature limit of the surfactant was 128 °C. The effectiveness of CO2/N2 switching was confirmed by analysis of the electrical conductivity and surface tension. Utilizing the foaming agent, 3 different foam systems (unstable, stable, and hard) were designed for drilling after formula optimization. Experimentally, the self‐circulation indicated that the foaming fluids still maintained great foaming performance even after multiple cycles. The experiment also indicated that the suspension of the foam systems was 50–90 times that of water and had a significant resistance to salts (NaCl, CaCl2). Besides, the foam systems found that the suitable foaming temperature was 40–100 °C and that the hard foam system could maintain the foaming performance up to 120 °C. In the oil resistance experiment, the foaming ability of the foam systems decreased obviously above a kerosene content of 5% (w/v), whereas a certain foaming performance still could be ensured below 10% kerosene.