Loading…

QR Code

The development of accurate stagnation temperature probes for gas turbine applications

During gas turbine development testing, measurements of the gas-path stagnation temperature are used to characterise the engine running condition and establish individual engine component performance. These measurements are typically acquired using passively ventilated thermocouple probes, which are...

Full description

Saved in:

Bibliographic Details
Main Author:	Clare Bonham
Format:	Default Thesis
Published:	2015
Subjects:	Other engineering not elsewhere classified Gas turbine engines Stagnation temperature Platinum resistance thermometry Temperature recovery factor Engineering not elsewhere classified
Online Access:	https://hdl.handle.net/2134/19526
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Stagnation temperature measurement using thin-film platinum resistance sensors
by: Clare Bonham, et al.
Published: (2013)

Combination probes for stagnation pressure and temperature measurements in gas turbine engines
by: Clare Bonham, et al.
Published: (2018)

Modelling the temperature recovery factor of stagnation temperature probes used in gas turbine engine test rigs
by: Ben Thorpe
Published: (2021)

Fundamentals of temperature, pressure and flow measurements / Robert P. Benedict.
by: Benedict, Robert P.
Published: (1977)

Impact of flow unsteadiness on steady-state gas-path stagnation temperature measurements
by: Clare Bonham, et al.
Published: (2018)

Gas path fault and degradation modelling in twin-shaft gas turbines
by: Samuel Cruz-Manzo, et al.
Published: (2018)

A segmented fuel cell unit with functionally graded distributions of platinum loading and operating temperature
by: Lei Xing, et al.
Published: (2020)

Gas turbine combustor port flows
by: Adrian Spencer
Published: (1998)

Reduction of impacts of oil and gas operations through intelligent maintenance solution
by: Jerry Eyoh, et al.
Published: (2018)

The effect of manufacturing tolerances on the performance of gas turbine air system metering holes with chamfered inlets
by: Polina Chernukha, et al.
Published: (2018)

The unsteady fuel flow response of liquid fuelled gas turbine injector to applied fluctuation
by: Ran Mo
Published: (2017)

Aerodynamic design of a cooled cooling air system for an aero gas turbine
by: Duncan Walker, et al.
Published: (2017)

Aerodynamics of multi-passage swirling flows for gas turbine fuel injectors
by: Andres Leiva-Gonzalez
Published: (2019)

Compromised heat loss leads to a delayed ice slurry induced reduction in heat storage
by: Tom OBrien, et al.
Published: (2024)

The application of porous media to simulate the upstream effects of gas turbine injector swirl vanes
by: Christopher L. Ford, et al.
Published: (2013)

An improved transmitter system to accurately measure wet-bulb temperature of air
by: Liangwen Yan, et al.
Published: (2019)

Aerodynamic design of the coolant delivery system for an intercooled aero gas turbine engine
by: Chris A'Barrow
Published: (2013)

Grey-box modelling of the swirl characteristics in gas turbine combustion system
by: Eve Zhang, et al.
Published: (2019)

Effect of compressor unsteady wakes on a gas turbine combustor flow
by: Alessandro Soli, et al.
Published: (2022)

Particle image velocimetry in gas turbine combustor flow fields
by: David Hollis
Published: (2004)

Advanced cryogenics / edited by C.A. Bailey.
by: Bailey, Colin Alfred
Published: (1971)

Density-based unstructured simulations of gas-turbine combustor flows
by: Ahmed N. Almutlaq
Published: (2007)

Flame initiation and development at sub-atmospheric conditions in aeronautical gas turbine combustors
by: Dimitri Franz
Published: (2023)

The impact of intake pressure on high exhaust gas recirculation low-temperature compression ignition engine combustion using borescopic imaging
by: AK Sarangi, et al.
Published: (2021)

Plants and temperature / (by) James Sutcliffe.
by: Sutcliffe, James F.
Published: (1977)

Gas turbine fuel atomiser design for reduced particulate emissions
by: David Oliver-Cortadellas
Published: (2022)

An isothermal experimental study of the unsteady fluid mechanics of gas turbine fuel injector flowfields
by: Kris Midgley
Published: (2005)

Effects of intake-port throttling on combustion behaviour in diesel low-temperature combustion
by: Oluwasujibomi Sogbesan, et al.
Published: (2017)

Rotational, vibrational, and excitation temperatures of a microwave-frequency microplasma
by: Felipe Iza, et al.
Published: (2004)

Development of acoustic-enhanced damping configurations for gas turbine combustion systems
by: Mark Cassell
Published: (2017)

Cryogenic systems / (by) Randall Barron.
by: Barron, Randall F.
Published: (1966)

Evaluating neutral, preferred and comfort range temperatures and computing adaptive equation for Kano region
by: Sani Muhammad Ali, et al.
Published: (2020)

Acoustic absorption and the unsteady flow associated with circular apertures in a gas turbine environment
by: Jochen Rupp
Published: (2013)

GPU-accelerated parallel coevolutionary algorithm for parameters identification and temperature monitoring in permanent magnet synchronous machines
by: Zhao-Hua Liu, et al.
Published: (2015)

Shape modification of needle crystals using polymer additives and temperature cycling [Abstract]
by: Wei Li, et al.
Published: (2023)

Impact of a cooled cooling air system on the external aerodynamics of a gas turbine combustion system
by: Duncan Walker, et al.
Published: (2017)

Performance Comparison of Finite-Volume and Spectral/hp Methods for LES of Representative Gas Turbine Combustor Aerodynamics
by: Vishal Saini, et al.
Published: (2019)

Improved modelling capabilities of the airflow within turbine case cooling systems using smart porous media
by: Yanling Li, et al.
Published: (2018)

Low temperature spectroscopy : optical properties of molecules in matrices, mixed crystals and frozen solutions / (by) Beat Meyer.
by: Meyer, Beat
Published: (1971)

Sensor technology for in situ monitoring of the surface temperature distribution of SOFC
by: Manoj Prasanna Ranaweera
Published: (2016)