Loading…

QR Code

A slow-release urea fertilizer based on a natural rubber matrix

By the year 2000 increase to around SYNOPSIS the world 6 billion population for which output of between 1.5 to 2 times that is an of required. Since the cultivated land areas are expand by only 20%, there will be an absolute expected to agricultural 1980 will be expected need that to the use of nitr...

Full description

Saved in:

Bibliographic Details
Main Author:	Ridha Arizal
Format:	Default Thesis
Published:	1988
Subjects:	Materials engineering not elsewhere classified untagged Materials Engineering not elsewhere classified
Online Access:	https://hdl.handle.net/2134/10451
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Morphology and properties of blends of natural rubber and epoxidised natural rubber
by: Haidzir Abdul Rahman
Published: (1990)

Interpenetrating polymer networks based on natural rubber and poly(methylmethacrylate)
by: Madhupani M. Jayasuriya
Published: (2006)

Crosslink density distributions in natural rubber/nitrile rubber blends
by: Michael V. Lewan
Published: (1995)

Bisperoxycarbamates as crosslinking agents for natural and polyisoprene rubbers
by: Abu bin Amu
Published: (1981)

Natural rubber: network changes with vulcanization temperature
by: Cheng Teik Loo
Published: (1974)

Inter-property relationships for natural rubber compounds
by: Prasert Khunkamchoo
Published: (1993)

Non-migratory antiozonant system for natural rubber
by: Maclean J. Bhala
Published: (1997)

Short fibre woodcellulose as a filler for natural rubber
by: Ku Abd Rahman Ku Ismail
Published: (1983)

The drying of natural rubber. Further studies of the stress relaxation behaviour of rubber in compression
by: Mohd Tahir Bin Abdul Rahman
Published: (1985)

The reinforcement of natural rubber latex with chemically activated starches
by: Pansa Chuoy-Plong
Published: (1990)

The use of flame-retardant additives in natural and chloroprene rubbers
by: Dayang H. Abang Ismawi Hassim
Published: (2004)

Composites of natural rubber and polyaramid short fibres
by: Yusof Bin Aziz
Published: (1981)

Study of postvulcanisation of natural rubber latex films
by: Jacqueline Smeaton
Published: (1998)

A novel tensile stress relaxation test: development and applications to a study of non-rubber constituents and fillers in natural rubber
by: Alias B. Othman
Published: (1994)

Waterborne polyurethane ionomers: structure–property relationships of elastomeric polyurethane ureas and polyurethane ionomers
by: Eman Alsaffar
Published: (2006)

The influence of mixing on the morphology and properties of blends of natural and nitrile rubber
by: Dilhara G. Edirinsinghe
Published: (1999)

The nature of impact improvement in glassy thermoplastics modified by a discrete rubber phase
by: John D. Moore
Published: (1971)

Sequential interpenetrating polymer networks of epoxidised natural rubber and alkyl methacrylates
by: Ahmad M. Mohammed Yusof
Published: (1999)

Organically-modified layered silicates as reinforcing fillers for natural and synthetic rubbers
by: Jirachai Mingbunjerdsuk
Published: (2005)

Factors affecting adhesion of natural rubber-to-brass plated steel wire
by: Ali A. Hassan
Published: (1980)

Modes of action of a fatty diamine surfactant on mechanical properties of natural rubber compounds
by: Hanafi Ismail
Published: (1994)

Development and evaluation of dispersing agents for carbon black filled natural rubber compounds
by: J. Anoma G.S.G. Gunewardena
Published: (1999)

Biodeterioration of rubbers
by: Hwee Tatz Thai
Published: (1993)

Controlled release of antioxidants from silica hybrids
by: Carlo Capra
Published: (2005)

Cure efficiency of dodecyl succinic anhydride as a cross-linking agent for elastomer blends based on epoxidized natural rubber
by: Leno Mascia, et al.
Published: (2014)

Starch as a filler for rubber compounds
by: Mazlina Mustafa-Kamal
Published: (2007)

Isotropic rubber moulding
by: Timothy M.D. Buffham
Published: (1999)

Development of rubber–thermoplastic blends from ground tyre rubber and waste polypropylene
by: Shantha M. Egodage
Published: (2008)

Glass fibre coatings based on polyimide–silica hybrids for use in epoxy matrix composites
by: Halil Demirer
Published: (1998)

Effect of the blooming of chemical curatives on the dynamic behaviour of silanised silica-filled natural rubber-to-metal bonded bobbins
by: Farhan Saeed, et al.
Published: (2013)

Revisiting the sulfur vulcanisation of rubber
by: Saad H. Sheikh, et al.
Published: (2018)

Hybrid reinforcement of silicone rubber
by: Ali Ansarifar, et al.
Published: (2013)

Electrically conductive silicone rubber
by: James D. Ajayi
Published: (1982)

Melt behaviour of thermoplastic rubbers
by: Sebastiao V. Canevarolo
Published: (1986)

Effect of hybrid reinforcement based on precipitated silica and montmorillonite nanofillers on the mechanical properties of a silicone rubber
by: Nik I. Nik Ismail, et al.
Published: (2014)

Laser and other cleaning procedures for aerospace moulds and a study of mould release agents.
by: Robert E. Litchfield
Published: (2004)

Measuring effect of the blooming of chemical curatives on the rate of cyclic fatigue crack growth in natural rubber filled with a silanized silica nanofiller
by: Farhan Saeed, et al.
Published: (2012)

Cationic surfactants in rubber compounding
by: Mauyed Sahib Mahdi
Published: (1984)

A review of sulfur vulcanization of rubber
by: Ali Ansarifar
Published: (2018)

Dispersion of particulate additives in rubber using the batch operated internal mixer : a study of flow behaviour and properties of rubber mixes
by: W.Y. Wan Idris
Published: (1978)