Loading…

QR Code

Injection moulding variables and their influence on some properties of semi-crystalline polymers

The present thesis is written according to the following sequence: first a literature review on injection moulding is presented, followed by an account of the influence from process variables on properties of mouldings; then follows a description of the instruments developed in relation to the proje...

Full description

Saved in:

Bibliographic Details
Main Author:	Mogens Jensen
Format:	Default Thesis
Published:	1980
Subjects:	Materials engineering not elsewhere classified untagged Materials Engineering not elsewhere classified
Online Access:	https://hdl.handle.net/2134/27378
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Effects of some injection moulding variables on the properties of injection-moulded rigid PVC
by: Mudhaffar A. Bakir
Published: (1980)

Blends of some crystalline polymers
by: David L. Buszard
Published: (1973)

Injection moulding: properties customization by varying process conditions
by: Tino Meyer, et al.
Published: (2016)

Some aspects concerning the powder injection moulding of hardmetal components
by: Michael T. Martyn
Published: (1991)

Morphology and properties of nylon 66 : effects of injection moulding on structure and performance
by: Victor S. Jackson
Published: (1973)

Some aspects of the injection moulding of alumina and other engineering ceramics
by: M. Youseffi
Published: (1992)

The variation in physical and structural properties with processing conditions of injection moulded rigid PVC
by: Clive J. Copsey
Published: (1980)

The influence of manufacturing variables on the static and dynamic compressive strength of pre-preg moulded materials
by: Swee-Cheng Yap
Published: (1991)

Processing of highly filled polyurethane elastomers by reaction injection moulding
by: Shiying Lu
Published: (1999)

Powder injection moulding of steel–hardmetal graded structure composites
by: Peter D. Lane
Published: (1991)

Some polymer blends and block copolymers : preparation and properties
by: Frederick R. Colley
Published: (1974)

A computer-aided analysis of polyolefins mixing quality parameters associated with injection moulding
by: Laith H.A. Latif
Published: (1991)

A study on design data and methods for plate-like injection moulded thermoplastics products
by: Antonio S.D. Pouzada
Published: (1982)

Internal mixing of rubber : the influence of process variables on mixed material properties
by: Peter C. Ebell
Published: (1981)

Influence of machine and material variables on fundamental rheological properties of rubber mixes
by: Kamarul B. bin Basir
Published: (1985)

Investigation of some factors affecting the quality of thermoset mouldings
by: Keith A. Brooks
Published: (1982)

The development of a mathematical model and computer program for simulating the injection moulding of thermosetting elastomer materials
by: Stephen Bowers
Published: (1990)

Crystallinity control in parts produced from stereolithography injection mould tooling
by: Russell A. Harris, et al.
Published: (2003)

A study of flow analysis and moulding simulations of highly filled polymers
by: Marianne Guinebaud
Published: (2002)

A study of the miscibility of crystalline polyolefins
by: Naba K. Datta
Published: (1982)

Selection of mould design variables in direct stereolithography injection mould tooling
by: Russell Harris, et al.
Published: (2002)

Effect of POSS on crystalline transitions and physical properties of polyamide 12
by: Chaoying Wan, et al.
Published: (2009)

Influence of temperature, ripening time and calcination on the morphology and crystallinity of hydroxyapatite nanoparticles
by: Yongxin Pang, et al.
Published: (2003)

The relationship between structure, properties and problems in application of reinforced thermoplastic rubber mouldings
by: Dalbir S. Nandra
Published: (1978)

Fracture mechanics approach to compare laser sintered parts and injection mouldings of nylon-12
by: David Hitt, et al.
Published: (2011)

Some properties of sintered materials
by: S.H. Williams
Published: (1973)

The effect of morphology and microstructural interfaces on the properties of high density polyethylene blow moulded containers
by: Shashi K. Garg
Published: (1980)

Isotropic rubber moulding
by: Timothy M.D. Buffham
Published: (1999)

The effect of thermal treatment and processing on the crystallinity and thermal behaviour of PVC
by: Patricia C. Dawson
Published: (2018)

Laser and other cleaning procedures for aerospace moulds and a study of mould release agents.
by: Robert E. Litchfield
Published: (2004)

Water vapour permeability of poly(lactic acid): crystallinity and the tortuous path model
by: Zhouyang Duan, et al.
Published: (2014)

Structure–property relationships in polymer-polyols-based polyurethane elastomers
by: Nabil A. Saleh
Published: (1990)

Process simulation and optimisation of thin wall injection moulded components
by: Aravind Mullath
Published: (2013)

PP/clay nanocomposites: compounding and thin-wall injection moulding
by: Tingrui Fu
Published: (2017)

EMI properties of electroless nickel-coated mica in different polymer matrices
by: Balasubramanian Kandasubramanian
Published: (2003)

Preparation and characterization of graphene/polymer nanocomposites with improved mechanical properties
by: Mo Song, et al.
Published: (2016)

The influence of fire retardant additives on the properties of HIPS and PBT
by: Simon J. Elliott
Published: (2002)

The influence of magnesium hydroxide morphology on the mechanical properties of polypropylene
by: Mark Cook
Published: (1996)

A review of the water barrier properties of polymer/clay and polymer/graphene nanocomposites
by: Bowen Tan, et al.
Published: (2016)

The effect of internal mixer variables on the rheological properties and extrusion characteristics of an ethylene-propylene rubber compound
by: Andreas P. Kakouris
Published: (1983)