Loading…

QR Code

A review of sulfur vulcanization of rubber

This one page article is an opinion on the sulfur vulcanization of rubber. It states that combining zinc oxide with a sulfenamide accelerator into one composite powder provides a more efficient method of curing rubber with sulfur, reducing the total curatives requirement by 77wt%.

Saved in:

Bibliographic Details
Main Author:	Ali Ansarifar
Format:	Default Article
Published:	2018
Subjects:	Materials engineering not elsewhere classified Curatives Sulfur vulcanization Efficieny Materials Engineering not elsewhere classified
Online Access:	https://hdl.handle.net/2134/34458
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

An alternative method for the vulcanization of rubber articles
by: Ali Ansarifar, et al.
Published: (2019)

Comparing two highly efﬁcient methods for sulfur curing of rubber
by: Ali Ansarifar, et al.
Published: (2021)

Major reduction in chemical curatives for rubber articles
by: Ali Ansarifar, et al.
Published: (2019)

Revisiting the sulfur vulcanisation of rubber
by: Saad H. Sheikh, et al.
Published: (2018)

Kaolin reinforcement of some rubbers with novel sulfur cure systems
by: Ali Ansarifar, et al.
Published: (2018)

Natural rubber: network changes with vulcanization temperature
by: Cheng Teik Loo
Published: (1974)

Effect of various efficient vulcanization cure systems on the compression set of a nitrile rubber filled with different fillers
by: Saeed Ostad Movahed, et al.
Published: (2015)

Novel sulfur-cure systems
by: Saad Sheikh, et al.
Published: (2016)

Using a sulfur-bearing silane to improve rubber formulations for potential use in industrial rubber articles
by: Ali Ansarifar, et al.
Published: (2013)

The potential of kaolin as a reinforcing filler for rubber composites with new sulfur cure systems
by: Saad Sheikh, et al.
Published: (2017)

Developing ethylene-propylene-diene rubber compounds for industrial applications using a sulfur-bearing silanized silica nanofiller
by: Ali Ansarifar, et al.
Published: (2013)

Optimising silanes in silica-filled rubber products
by: Ali Ansarifar, et al.
Published: (1999)

Hybrid reinforcement of silicone rubber
by: Ali Ansarifar, et al.
Published: (2013)

A review of the reclaiming of rubber waste and recent work on the recycling of ethylene-propylene-diene rubber waste
by: Saeed Ostad Movahed, et al.
Published: (2016)

Measuring dynamic properties of rubbers filled with silanised silica nanofiller
by: Saeed Ostad Movahed, et al.
Published: (2009)

Method for preparing rubber formulations using silanized silica nanofiller
by: Ali Ansarifar, et al.
Published: (2007)

Curing rubber compounds efficiently and cost-effectively
by: Ali Ansarifar, et al.
Published: (2009)

Effect of hybrid reinforcement based on precipitated silica and montmorillonite nanofillers on the mechanical properties of a silicone rubber
by: Nik I. Nik Ismail, et al.
Published: (2014)

Devulcanization and recycling of waste automotive EPDM rubber powder by using shearing action and chemical additive
by: Saeed Ostad Movahed, et al.
Published: (2015)

Biodeterioration of rubbers
by: Hwee Tatz Thai
Published: (1993)

Effect of the blooming of chemical curatives on the dynamic behaviour of silanised silica-filled natural rubber-to-metal bonded bobbins
by: Farhan Saeed, et al.
Published: (2013)

Morphology and properties of blends of natural rubber and epoxidised natural rubber
by: Haidzir Abdul Rahman
Published: (1990)

Crosslink density distributions in natural rubber/nitrile rubber blends
by: Michael V. Lewan
Published: (1995)

Measuring effect of the blooming of chemical curatives on the rate of cyclic fatigue crack growth in natural rubber filled with a silanized silica nanofiller
by: Farhan Saeed, et al.
Published: (2012)

Improving heat ageing and thermal properties of silicone rubber using montmorillonite clay
by: Ali Ansarifar, et al.
Published: (2014)

Isotropic rubber moulding
by: Timothy M.D. Buffham
Published: (1999)

A novel industrial technique for recycling ethylene-propylene-diene waste rubber
by: Saeed Ostad Mohaved, et al.
Published: (2015)

Factors affecting adhesion of natural rubber-to-brass plated steel wire
by: Ali A. Hassan
Published: (1980)

Preparation and characterization of high performance exfoliated montmorillonite/silicone rubber nanocomposites with enhanced mechanical properties
by: Nik I. Nik Ismail, et al.
Published: (2013)

Development of rubber–thermoplastic blends from ground tyre rubber and waste polypropylene
by: Shantha M. Egodage
Published: (2008)

Starch as a filler for rubber compounds
by: Mazlina Mustafa-Kamal
Published: (2007)

Electrically conductive silicone rubber
by: James D. Ajayi
Published: (1982)

Melt behaviour of thermoplastic rubbers
by: Sebastiao V. Canevarolo
Published: (1986)

A little extra
by: Ali Ansarifar
Published: (2016)

The drying of natural rubber. Further studies of the stress relaxation behaviour of rubber in compression
by: Mohd Tahir Bin Abdul Rahman
Published: (1985)

Cationic surfactants in rubber compounding
by: Mauyed Sahib Mahdi
Published: (1984)

A novel tensile stress relaxation test: development and applications to a study of non-rubber constituents and fillers in natural rubber
by: Alias B. Othman
Published: (1994)

Feminism/Colonialism
by: Hilary Robinson
Published: (2024)

Dispersion of particulate additives in rubber using the batch operated internal mixer : a study of flow behaviour and properties of rubber mixes
by: W.Y. Wan Idris
Published: (1978)

Swelling behaviour of nitrile rubber in organic liquids
by: Samir N. Lawandy
Published: (1973)