Loading…

QR Code

Using wire shaping techniques and holographic optics to optimise deposition characteristics in wire-based laser cladding

In laser cladding, the potential benefits of wire feeding are considerable. Typical problems with the use of powder, such as gas entrapment, sub-100% material density and low deposition rate are all avoided with the use of wire. However, the use of a powder-based source material is the industry stan...

Full description

Saved in:

Bibliographic Details
Main Authors:	Nick Goffin, Rebecca Higginson, John Tyrer
Format:	Default Article
Published:	2017
Subjects:	Materials engineering not elsewhere classified Laser cladding Wire shaping Power density Dilution Holographic optics Materials Engineering not elsewhere classified
Online Access:	https://hdl.handle.net/2134/23878
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Using Wire Shaping Techniques and Holographic Optics to optimise Deposition Characteristics in Wire-based Laser Cladding - dataset
by: Nick Goffin, et al.
Published: (2017)

The laser deposition of shaped metallic wire using holographic optical elements
by: Nicholas J. Goffin
Published: (2016)

The use of holographic optical elements (HOE's) to investigate the use of a flat irradiance profile in the control of heat absorption in wire-fed laser cladding
by: Nick Goffin, et al.
Published: (2015)

Round wire cladding heat conduction
by: Nick Goffin, et al.
Published: (2021)

The use of holographic optics for heat flow control in wire-based laser cladding
by: Nick Goffin, et al.
Published: (2014)

Weld pool shaping and microstructural control using novel computer generated holographic optic laser welding of steel and stainless steel
by: Rebecca Higginson, et al.
Published: (2009)

Simulated and experimental analysis of laser beam energy profiles to improve efficiency in wire-fed laser deposition
by: Nick Goffin, et al.
Published: (2021)

Exploding wires / edited by William G. Chace and Howard K. Moore.
Published: (1959)

Inspection and testing to the 16th edition of the IEE wiring regulations / Ted Stocks.
by: Stocks, E. G.
Published: (1992)

Holographic metasurface design for flexible beamforming antennas
by: Praveen Kumar Sharma, et al.
Published: (2024)

Installations to the 16th edition of the IEE wiring regulations : an update course / Charles Duncan, Ted Stocks.
by: Duncan, C.
Published: (1991)

Single feed dual-beam linearly polarized holographic metasurface antenna
by: Swarnadipto Ghosh, et al.
Published: (2024)

Annealing of thin-film cadmium telluride photovoltaics using holographically controlled laser processing
by: Nick Goffin, et al.
Published: (2016)

A nine-pulse line-commutated converter for six-wire bipolar HVDC transmission
by: Shoaib Shaikh, et al.
Published: (2024)

Simple determination of the axial stiffness for largediameter independent wire rope core or fibre core wire ropes
by: Mohammed Raoof, et al.
Published: (2003)

Structural response of simple partially-clad steel frames to long-duration blast loading
by: Laura Cannon, et al.
Published: (2021)

Embroidered wire dipole antennas using novel copper yarns
by: Tessa Acti, et al.
Published: (2014)

Study of the efficiency of energy transfer from chemical to acoustic pressure impulse for an underwater aluminum exploding wire
by: Thanasi Frost, et al.
Published: (2022)

Bonding of rubber to brass-plated steel wire
by: Alireza Aref-Azar
Published: (1982)

An exploding wire technique for the initiation of radially symmetric stress pulses in cylindrical specimens
by: Ian G. Butler
Published: (2020)

Wired/Wireless Network based Technologies for Remote Monitoring and Control
by: Shuang-Hua Yang
Published: (2014)

Performance of wire-bonded interconnects under combined thermal and vibration loads
by: Maria Mirgkizoudi
Published: (2015)

Transient fault tolerant control for vehicle brake-by-wire systems
by: Shuang Huang, et al.
Published: (2016)

Cladding interface management: UOB Plaza, Singapore
by: Alistair Gibb
Published: (1996)

Factors affecting adhesion of natural rubber-to-brass plated steel wire
by: Ali A. Hassan
Published: (1980)

Mechanical and electrical characterisation of Au wire interconnects in electronic packages under the combined vibration and thermal testing conditions
by: Maria Mirgkizoudi, et al.
Published: (2015)

Effective interface management for complex cladding projects: UOB Plaza, Singapore
by: Alistair Gibb
Published: (1997)

A tensor-based catheter and wire detection and tracking framework and its clinical applications
by: Yingliang Ma, et al.
Published: (2021)

Impact of PWM voltage waveforms on magnet wire insulation partial discharge in SiC-based motor drives
by: Mohamed Diab, et al.
Published: (2021)

Process monitoring for laser-directed energy deposition with respect to a retrofit hybrid manufacturing system
by: Keith Lorenz
Published: (2019)

A novel method to aid stent and catheter design based on practical investigations observing in-vitro endoluminal delivery and 3-D movement of Nitinol wire during the Shape Memory Effect
by: Richard L.S. Gill
Published: (2005)

Electric Wiring (Domestic).
Published: (1969)

Spring based connection of external wires to a thin film temperature sensor integrated inside a solid oxide fuel cell
by: Erdogan Guk, et al.
Published: (2018)

Erosion resistance of laser clad Ti-6Al-4V/WC composite for waterjet tooling
by: P.K. Farayibi, et al.
Published: (2014)

Lifetime estimation of enameled wires under accelerated thermal aging using curve fitting methods
by: Muhammad Raza Khowja, et al.
Published: (2021)

Beginner's guide to electric wiring.
by: Sykes, John Henry Miller
Published: (1965)

Deflection and shape change of smart composite laminates using shape memory alloy actuators
by: Adam R. Giles
Published: (2005)

Surface improvement of laser clad Ti-6Al-4V using plain waterjet and pulsed electron beam irradiation
by: P.K. Farayibi, et al.
Published: (2015)

Processing of bulk nanostructured ceramics
by: J.G.P. Binner, et al.
Published: (2008)

Exploring shape complexity factors in material deposition and material jetting build time
by: Patrick Pradel, et al.
Published: (2017)