Loading…

QR Code

The perfect cure

I n the processing of raw rubber, sulfur is added for shape retention. To enhance the efficiency of curing and the vulcanization process, chemical curatives known as accelerators and activators are frequently used. However, excessive use of chemical curatives has raised major concerns about their ad...

Full description

Saved in:

Bibliographic Details
Main Authors:	Ali Ansarifar, Kornkanok Noulta, Saad H. Sheikh, Xujin Bao, George Weaver, K.G.U. Wijayantha
Format:	Default Article
Published:	2019
Subjects:	Materials engineering not elsewhere classified untagged Materials Engineering not elsewhere classified
Online Access:	https://hdl.handle.net/2134/37671
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Novel sulfur-cure systems
by: Saad Sheikh, et al.
Published: (2016)

Kaolin reinforcement of some rubbers with novel sulfur cure systems
by: Ali Ansarifar, et al.
Published: (2018)

Schwefelvernetzung von Kautschuk auf dem Prufstand
by: Ali Ansarifar, et al.
Published: (2018)

Revisiting the sulfur vulcanisation of rubber
by: Saad H. Sheikh, et al.
Published: (2018)

A study of the effects of kaolin, solid filler on the processing, mechanical, and dynamic properties of some industrial rubbers cured with novel sulphur cure system
by: Saad H. Sheikh
Published: (2017)

The potential of kaolin as a reinforcing filler for rubber composites with new sulfur cure systems
by: Saad Sheikh, et al.
Published: (2017)

Verstaerkung verschiedener Elastomere mit Kaolin und Optimierung des Schwefelvernetzungssystems
by: Saad Sheikh, et al.
Published: (2017)

Perfect couple: optimizing the use of Si69 coupling agent in tire formulation
by: Zainudin Bin Umar, et al.
Published: (2016)

Carbon black alternative
by: Saad H. Sheikh, et al.
Published: (2015)

Curing rubber compounds efficiently and cost-effectively
by: Ali Ansarifar, et al.
Published: (2009)

Effect of various efficient vulcanization cure systems on the compression set of a nitrile rubber filled with different fillers
by: Saeed Ostad Movahed, et al.
Published: (2015)

Comparing two highly efﬁcient methods for sulfur curing of rubber
by: Ali Ansarifar, et al.
Published: (2021)

Major reduction in chemical curatives for rubber articles
by: Ali Ansarifar, et al.
Published: (2019)

Characterisation and cure phenomena of phenolformaldehyde resins
by: Arthur Blinkhorn
Published: (1984)

Development of long fibre heat cure phenolic dough moulding compounds
by: Kristof Debrabandere
Published: (1994)

A novel method for the optimization of sulfur cure systems for rubber using software
by: Ali Ansarifar, et al.
Published: (2020)

A little extra
by: Ali Ansarifar
Published: (2016)

Compatibilization of PUR/PVAC polymer blend by addition of calcium carbonate filler
by: Domagoj Vrsaljko, et al.
Published: (2014)

A preliminary investigation into the apparent abhesive effect of stearic acid on cured silicone elastomer
by: U.J. Ana, et al.
Published: (2010)

Development of continuous compounded grades of fibre-reinforced composites based on non-acid cure phenolic resols
by: Mohammad Kazemi-Fakhr
Published: (1992)

Aluminium oxide nanoparticles prepared by water-in-oil microemulsions
by: Yongxin Pang, et al.
Published: (2002)

Preparation and characterization of benzoxazine based nanocomposites: comprehensive study in curing kinetics and enhanced thermal stabilities
by: Yue Lin, et al.
Published: (2015)

Polycyclodisilazane: a new polymeric precursor for silicon nitride-based ceramics
by: Xujin Bao, et al.
Published: (2000)

Use of trichlorophenylsilane in the synthesis of polymeric precursors for silicon carbide
by: Xujin Bao, et al.
Published: (1998)

A review of sulfur vulcanization of rubber
by: Ali Ansarifar
Published: (2018)

Evolution of transient states and properties of an epoxy-silica hybrid cured at ambient temperature
by: Francesca Lionetto, et al.
Published: (2013)

Preparation of tricalcium phosphate/alumina composite nanoparticles and self-reinforcing composites by simultaneous precipitation
by: Yongxin Pang, et al.
Published: (2004)

Optimising effect of silanised silica nanofillers on the cure, processing and mechanical properties of various elastomers
by: Zainudin Bin Umar
Published: (2017)

Optimum accelerator efficiency
by: Ali Ansarifar, et al.
Published: (2020)

An enduring product
by: Ali Ansarifar, et al.
Published: (2002)

Silanes among the silica
by: Ali Ansarifar, et al.
Published: (2000)

Optimising silanes in silica-filled rubber products
by: Ali Ansarifar, et al.
Published: (1999)

The use of post-electroplating surface modification treatments to mitigate tin whisker growth
by: Dan Haspel, et al.
Published: (2017)

The rise and rise of synthetic silicas
by: Ali Ansarifar, et al.
Published: (2001)

Sulfonated poly(2,5-benzimidazole) (ABPBI)/ MMT/ ionic liquids composite membranes for high temperature PEM applications
by: Xujin Bao, et al.
Published: (2015)

Influence of temperature, ripening time and calcination on the morphology and crystallinity of hydroxyapatite nanoparticles
by: Yongxin Pang, et al.
Published: (2003)

New rubber compound
by: Ali Ansarifar, et al.
Published: (2019)

Effect of graphene oxide sheet size on the curing kinetics and thermal stability of epoxy resins
by: Xiao Wang, et al.
Published: (2016)

Novel ABPBI/POSS composite membranes for high-temperature PEMFC applications
by: Qingting Liu, et al.
Published: (2011)

Effect of acetylacetone on the preparation of PZT materials in sol-gel processing
by: Luqian Weng, et al.
Published: (2002)