Loading…

QR Code

Characterisation of lithographically printed resistive strain gauges

This paper reports progress in sensor fabrication by the conductive lithographic film (CLF) printing process.Work describing strain-sensitive structures manufactured using a modified printing process and conductive inks is addressed. The performance of a “single-ink” strain-sensitive structure when...

Full description

Saved in:

Bibliographic Details
Main Authors:	Gareth I. Hay, Peter S.A. Evans, David J. Harrison, Darren Southee, George Simpson, Paul M. Harrey
Format:	Default Article
Published:	2005
Subjects:	Design not elsewhere classified Mechanical engineering not elsewhere classified Conductive Lithographic Film (CLF) Offset lithography Printed sensors Printed strain gauges Design Practice and Management not elsewhere classified Mechanical Engineering
Online Access:	https://hdl.handle.net/2134/8477
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Conductive lithographic film fabricated resistive strain gauges
by: Gareth I. Hay, et al.
Published: (2003)

Examination of silver–graphite lithographically printed resistive strain sensors
by: Gareth I. Hay, et al.
Published: (2007)

Flexible dot-matrix display manufacture by offset lithography
by: Darren Southee, et al.
Published: (2008)

Wind driven rain gauge
by: Roelandus Tersteeg, et al.
Published: (2020)

Lithographically printed voltaic cells – a feasibility study
by: Darren Southee, et al.
Published: (2007)

Strain sensing characteristics of 3D-printed conductive plastics
by: Jack McGhee, et al.
Published: (2018)

Use of supramolecular assemblies as lithographic resists
by: Scott M. Lewis, et al.
Published: (2017)

2D characterisation and evaluation of multi-material structures towards 3D hybrid printing
by: Umur Cicek, et al.
Published: (2023)

Conducting metal oxide materials for printed electronics
by: Jack McGhee
Published: (2020)

Development and characterisation of lithographically printed voltaic cells
by: Darren Southee, et al.
Published: (2006)

A time-strain monitoring system fabricated via offset lithographic printing
by: Gareth I. Hay, et al.
Published: (2009)

Supplementary information files for Hot ceramic lithography of silica-based ceramic cores: The effect of process temperature on vat-photopolymierisation
by: Basar Ozkan, et al.
Published: (2023)

Hot ceramic lithography of silica-based ceramic cores: The effect of process temperature on vat-photopolymierisation
by: Basar Ozkan, et al.
Published: (2022)

Synergistic combination of carbon conductive and flexural additives for flexible screen-printed supercapacitor electrodes
by: Paulo Luís, et al.
Published: (2023)

Advanced finite element analysis for strain measurement in a threaded connection
by: Andras Bulkai
Published: (2007)

Printed electrodes for flexible, light-weight solid-state supercapacitors - a feasibility study
by: Jagdeep Sagu, et al.
Published: (2015)

Measurement of band alignment between ZnO based front emitters and CdCl<sub>2</sub> treated CdSeTe/CdTe absorbers
by: Xiaolei Liu, et al.
Published: (2022)

Printed, fully metal oxide, capacitive humidity sensors using conductive indium tin oxide inks
by: Jack McGhee, et al.
Published: (2020)

Printed ephemera : the changing uses of type and letterforms in English and American printing / John Lewis.
by: Lewis, John, 1912-
Published: (1962)

Investigation of out-of-plane displacement effects on local strains and low cycle fatigue life using the 3-D digital image correlation method
by: Anargyros Skarlas
Published: (2018)

A escolha pelo impresso de luxo / The choice for luxury printing
by: Andréa Franco Aminger, et al.
Published: (2020)

The use of virtual fixtures, jigs and gauges in dimensional variation analysis simulation models.
by: Paul Leaney, et al.
Published: (2013)

Ecoprinting: investigating the use of 100% recycled acrylonitrile butadiene styrene (ABS) for additive manufacturing
by: Mazher Mohammed, et al.
Published: (2020)

Digital design and fabrication of controlled porosity, personalized lower limb AFO splints
by: Mazher Mohammed, et al.
Published: (2020)

Fused filament fabrication additive manufacturing and characterisation at Loughborough University for RF applications
by: Athanasios Goulas, et al.
Published: (2022)

Experimental data - characterising a printable flexible strain sensor
by: Khaled Elgeneidy
Published: (2018)

3D printing ceramic cores for investment casting of turbine blades, using LCD screen printers: The mixture design and characterisation
by: Basar Ozkan, et al.
Published: (2021)

Popular prints of the Americas / by A. Hyatt Mayor.
by: Mayor, A. Hyatt (Alpheus Hyatt), 1901-
Published: (1973)

The development of Hypromellose based semisolid 3D printing inks for drug delivery
by: Bin Zhang, et al.
Published: (2021)

Home 3D printing: exploring owner engagement with desktop technologies in the UK
by: Jacquelyn Skelton
Published: (2024)

Measurement of strain and strain rate during the impact of tennis ball cores
by: Ben Lane, et al.
Published: (2018)

Indium tin oxide nanowires manufactured via printing and laser irradiation
by: Jack McGhee, et al.
Published: (2020)

Micro- and sub-microstructuring and characterisation of technical surfaces by means of laser direct writing including a novel approach for laser beam profiling
by: Hauke Buse
Published: (2011)

Semiconductor and conventional strain gages / editor, Mills Dean ; associate editor, Richard D. Douglas.
Published: (1962)

Layout and graphic design / Raymond A. Ballinger.
by: Ballinger, Raymond A. (Raymond Aldwyn), 1907-
Published: (1970)

Pioneers in printing.
by: Jennett, Seán
Published: (1958)

Resistance strain gauges : their construction and use / by J. Yarnell.
by: Yarnell, J.
Published: (1951)

The colonial printer / by Lawrence C. Wroth.
by: Wroth, Lawrence C. (Lawrence Counselman), 1884-1970
Published: (1964)

Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development
by: Guowei Ma, et al.
Published: (2022)

VOLCO-X: Numerical simulation of material distribution and voids in extrusion additive manufacturing
by: Rafael Quelho de Macedo, et al.
Published: (2021)