Loading…

QR Code

Non-linear vibro-impact phenomenon belying transmission idle rattle

This paper investigates automotive transmission gear rattle. Specifically, idle gear rattle, where the repetitive impacts of teeth are subject to light loads is investigated. Hydrodynamic regime of lubrication prevails in lightly loaded impact of teeth pairs. Formation of a lubricant film is due to...

Full description

Saved in:

Bibliographic Details
Main Authors:	Osman A.M. Tangasawi, Stephanos Theodossiades, Homer Rahnejat, P. Kelly
Format:	Default Article
Published:	2008
Subjects:	Mechanical engineering not elsewhere classified Transmission rattle Engine idling condition Lightly loaded hydrodynamic impact Mechanical Engineering not elsewhere classified Mechanical Engineering
Online Access:	https://hdl.handle.net/2134/4700
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Lightly loaded lubricated impacts: idle gear rattle
by: Osman A.M. Tangasawi, et al.
Published: (2007)

Gear teeth impacts in hydrodynamic conjunctions promoting idle gear rattle
by: Stephanos Theodossiades, et al.
Published: (2007)

Combined numerical and experimental investigation of transmission idle gear rattle
by: Osman A.M. Tangasawi
Published: (2007)

Gear transmission rattle: Assessment of meshing forces under hydrodynamic lubrication
by: Alfonso Fernandez-Del-Rincon, et al.
Published: (2019)

An investigation of manual transmission drive rattle
by: Miguel De-La-Cruz, et al.
Published: (2010)

The influence of transient thermo-elastohydrodynamic conjunctions on automotive transmission rattle
by: Miguel De la Cruz
Published: (2011)

Multi-physics approach for analysis of transmission rattle
by: Stephanos Theodossiades, et al.
Published: (2010)

Transient mixed thermo-elastohydrodynamic lubrication in multi-speed transmissions
by: Miguel De-La-Cruz, et al.
Published: (2012)

Effect of a dual-mass flywheel on the impact-induced noise in vehicular powertrain systems
by: Stephanos Theodossiades, et al.
Published: (2006)

On-line PID tuning for engine idle-speed control using continuous action reinforcement learning automata
by: M.N. Howell, et al.
Published: (2000)

High speed data transmission over HF radio links
by: McVerry Francis
Published: (1982)

Effects of transmission shaft flexibility on rolling element bearing tribodynamics in a high-performance transmission
by: Brett Thomas Friskney, et al.
Published: (2021)

Diamond like-carbon coatings for electric vehicle transmission efficiency
by: E Humphrey, et al.
Published: (2023)

Tribological investigation of truncated thermo-elastohydrodynamic elliptical point contacts in high performance transmissions
by: Vishak Elisaus, et al.
Published: (2016)

Effect of bearing thermally induced preload on the efficiency of automotive manual transmission under RDE
by: Angela Laderou, et al.
Published: (2019)

Integrated investigation of impact-induced noise and vibration in vehicular drivetrain systems
by: M. Gnanakumarr
Published: (2004)

Analysis of forces in vibro-impact and hot vibro-impact turning of advanced alloys
by: Riaz Muhammad, et al.
Published: (2011)

Thermal analysis of an oil jet-dry sump transmission gear under mixed-elastohydrodynamic conditions
by: Ehsan Fatourehchi, et al.
Published: (2018)

Effect of bearing preload on the efficiency of automotive manual transmission under RDE driving cycle
by: Angela Laderou, et al.
Published: (2018)

Friction lining characteristics and the clutch take up judder phenomenon with manual transmission
by: M.T. Menday, et al.
Published: (2010)

Parallel data-transmission systems using code-division multiplexing
by: Achintya K. Mukherjee
Published: (2022)

Mathematical modelling of balanced and unbalanced HVDC power transmission links
by: Colin Robert Fitton
Published: (1988)

Effect of teeth micro-geometrical form modification on contact kinematics and efficiency of high performance transmissions
by: Vishak Elisaus, et al.
Published: (2017)

Damping effects introduced by a nonlinear vibration absorber in automotive drivelines at idle engine speeds
by: Kelly Savva, et al.
Published: (2016)

Special issue on vibro-impact and friction dynamics [Editorial]
by: A Fidlin, et al.
Published: (2019)

Transient thermal analysis of mixed-elastohydrodynamic contact of high performance transmission in a dry sump environment
by: Ehsan Fatourehchi, et al.
Published: (2018)

Analysis of lubricated contact in continuously variable transmissions (CVT)
by: I. Medina Huerta, et al.
Published: (2016)

Axle whine phenomenon in light trucks: a combined numerical and experimental investigation
by: George Koronias, et al.
Published: (2011)

Stitched transmission lines for wearable RF devices
by: Isaac Daniel, et al.
Published: (2017)

Block-control methods for low-order automotive control
by: Christopher Ward, et al.
Published: (2008)

An alternative formulation of the dynamic transmission error to study the oscillations of automotive hypoid gears
by: Stephanos Theodossiades, et al.
Published: (2013)

Efficiency-prediction and enhancements of automotive manual transmissions
by: Angela Laderou
Published: (2020)

Health monitoring system for transmission shafts based on adaptive parameter identification
by: Ioannis Souflas, et al.
Published: (2017)

Dynamics and efficiency of planetary gear sets for hybrid powertrains
by: Mahdi Mohammadpour, et al.
Published: (2016)

On the effect of DLC and WCC coatings on the efficiency of manual transmission gear pairs
by: Angela Laderou, et al.
Published: (2020)

Effect of mesh phasing on the transmission efficiency and dynamic performance of wheel hub planetary gear sets
by: Ehsan Fatourehchi, et al.
Published: (2017)

Prediction of the spatial characteristics of higher mode sound transmission through a periodic slit screen
by: Jane Horner, et al.
Published: (2014)

Transmission line modelling of cylindrical cavity loaded with a slotted dielectric rod
by: Oluwafunmilayo Agunlejika, et al.
Published: (2016)

Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairs
by: Mahdi Mohammadpour, et al.
Published: (2014)

Thermal-hydrodynamic behaviour of coated pivoted pad thrust bearings: Comparison between Babbitt, PTFE and DLC
by: Konstantinos Katsaros, et al.
Published: (2018)