Search Results - BENDE, S. M~
-
1
-
2
-
3
A polygonal finite element for plate-bending problems
Published 2020“…A polygonal finite element for plate-bending problems…”
Get full text
Default OER -
4
-
5
On digital mysticism, or the secret of bending spoons
Published 2020Subjects: Get full text
Default Text -
6
-
7
-
8
Determination of the bending stiffness for a spiral strand
Published 2004“…It is very simple and relatively inexpensive to use in practice, for even very large (greater than, say, 100mm outside diameter) spiral strands. Effective bending stiffness measurements, based on this approach, are reported here for a 164mm outside diameter spiral strand (with axial loads of up to 3 MN), with these supported by a detailed theoretical analysis, which reinforces the generally sound nature of the proposed method.…”
Get full text
Default Article -
9
A study of football footwear bending stiffness
Published 2014“…The aim of this paper was to create a testing device to quantify whether the whole shoe needed to be considered when designing football boots. …”
Get full text
Default Article -
10
Bending vibration measurement on rotors by laser vibrometry
Published 1996“…Simultaneously the technique provides an accurate measure of shaft torsional vibration in situations in which measurements of torsional vibration have shown significant sensitivity to bending vibration. Experimental results validate the theory developed, and a conservative estimate of the minimum measurable bending vibration is made at 20 millidegrees.…”
Get full text
Default Article -
11
End fixity to spiral strands undergoing cyclic bending
Published 2005“…Based on a semi-empirical approach and guided by the previously reported experimental observations and theoretical work by the first author, it is suggested that for spiral strands with mean axial strains εc > 0.0025 and outside diameters d ≤ 40 mm, plane-section bending may reasonably be assumed in the course of theoretically determining the deflected shape, of the strands in the immediate vicinity of fixed end(s) with the proviso that, at the assumed ideal fixed end(s) to the spiral strands, p/d > 630, where p is the estimated minimum radius of curvature at the fixed end. …”
Get full text
Default Article -
12
Experimental analysis of the bending response of soft gripper fingers
Published 2016“…The behaviour of a soft finger upon actuation is primarily determined through its predefined morphology. …”
Get full text
Default Conference proceeding -
13
Fatigue of cracked high performance fiber reinforced concrete subjected to bending
Published 2019“…The aim of the present research is to perform a structural design oriented analysis on the behavior of pre-cracked HPFRC subjected to flexural fatigue loads. …”
Get full text
Default Article -
14
Experimental data - modelling the bending response of soft pneumatic actuators
Published 2017Get full text
Data Data -
15
Structural characteristics of various types of helically wound cables in bending
Published 2013“…Numerical results have been obtained and analysed for three different 127 mm diameter strands with lay angles of 12°, 18° and 24° respectively, experiencing a wide range of external hydrostatic pressures of 0 to 2,000 metres. …”
Get full text
Default Thesis -
16
Torsional and bending vibration measurement on rotors using laser technology
Published 1999“…The first bending mode of the crankshaft was identified and its vibration amplitude and damping estimated. …”
Get full text
Default Article -
17
Finite element modelling of bending of CFRP laminates: multiple delaminations
Published 2012“…Numerical simulations show that damage initiation and growth are sensitive to a mesh size of cohesive-zone elements. Top and bottom layers of a laminate experience mode-I failure whereas central layers exhibit a mode-II failure behaviour. …”
Get full text
Default Article -
18
A new finite element for structural problems involving in-plane bending
Published 2021“…A new finite element for structural problems involving in-plane bending…”
Get full text
Default OER -
19
Dynamic three-point bending tests under high loading rates
Published 2023“…To study the dynamic effect, dynamic factors for both types of stresses are defined and investigated by employing a dimensionless characteristic time and a strain rate. …”
Get full text
Default Article -
20
Numerical simulation of liquid water behavior in microchannel with a 90° bend
Published 2013“…The simulated microchannel has a square cross-section with a dimension of 0.25 mm and a total length of 1.5 mm. …”
Get full text
Default Conference proceeding -
21
Characterization of micro‐mechanical properties of AlON ceramic by cantilever bending test
Published 2019“…Moreover, the bonding strengths of twin lamella boundary, twin boundary and normal grain boundary in AlON transparent ceramics were 5.00 GPa, 5.05 GPa and 4.81 GPa respectively.…”
Get full text
Default Article -
22
A study of the electrochemical performance of strip supercapacitors under bending conditions
Published 2016“…The capacitance of the sample was still about 70% of the original capacitance at different bending angles. …”
Get full text
Default Article -
23
Correlation between the Barcelona test and the bending test in fibre reinforced concrete
Published 2017“…© 2017 Elsevier Ltd The Barcelona test (BCN) is an alternative method to characterize the post-cracking behaviour of fibre reinforced concrete (FRC). Given its simplicity, the reduced scatter of the results and low material consumption, the BCN may represent a suitable method for the quality control of FRC. …”
Get full text
Default Article -
24
Physical complexity to model morphological changes at a natural channel bend
Published 2016“…This study developed a two-dimensional (2-D) depth-averaged model for morphological changes at natural bends by including a secondary flow correction. …”
Get full text
Default Article -
25
Analysis of mechanical behaviour and damage of carbon fabric-reinforced composites in bending
Published 2013Subjects: Get full text
Default Thesis -
26
Printable soft grippers with integrated bend sensing for handling of crops [Abstract]
Published 2018Get full text
Default Conference proceeding -
27
Size-dependent crystal plasticity: from micro-pillar compression to bending
Published 2016“…The modelling approach is shown to capture the influence of loading conditions on the sample size effect observed in compression and bending experiments. A modelling study demonstrates the subtleness and importance of accounting for first-order and second-order effects in modelling crystalline materials in small length-scales.…”
Get full text
Default Article -
28
Optimal aero-elastic design of a rotor with bend-twist coupling
Published 2018“…This paper presents the re-design of a 100kW BTC rotor using the MDO rotor design package HAWTOpt2. …”
Get full text
Default Article -
29
-
30
-
31
Assessing pseudo-ductile behavior of woven thermoplastic composites under tension and bending
Published 2024“…Still, under some conditions, they can demonstrate ductile like response known as pseudo-ductility. To investigate such a response, experimental analysis of carbon- and glass-fabric reinforced thermoplastic polymer (C/GFRP) composites was performed in on- and off-axis orientations under service loading conditions of tension and bending. …”
Get full text
Default Article -
32
In-situ micro bend testing of SiC and the effects of Ga+ ion damage
Published 2017Get full text
Default Conference proceeding -
33
Correlation between the Barcelona test and the three-point bending test for the characterization of SCFRC
Published 2015“…Correlation factors above 0.85 were obtained, proving that an approach to standardised methods by means of non-standardised tests is possible.…”
Get full text
Default Conference proceeding -
34
Directly printable flexible strain sensors for bending and contact feedback of soft actuators
Published 2018“…A soft bending actuator following a pleated morphology, as well as a flexible resistive strain sensor, were directly 3D printed using easily accessible FDM printer hardware with a dual-extrusion tool head. …”
Get full text
Default Article -
35
Dynamic bending behaviour of woven composites for sports products: experiments and damage analysis
Published 2015“…Carbon fabric-reinforced polymer (CFRP) laminates employed in sports products are usually subjected to large-deflection quasi-static and dynamic bending deformations during service. Such loading conditions induce damage within the material affecting its strength, stiffness and energy-absorbing capability. …”
Get full text
Default Article -
36
Design and analysis of sprint footwear to investigate the effects of longitudinal bending stiffness on sprinting performance
Published 2008“…Medial and lateral sagittal plane data were collected at the start and in the acceleration (10 m) and maximal speed (50 m) phases of a 100 m distance. …”
Get full text
Default Thesis -
37
-
38
Propagation of plate bending waves in the vicinity of one- and two-dimensional acoustic ‘black holes’
Published 2007“…If to use some specific power-law profiles for these plates or bars then they would ideally provide zero reflection of bending waves from their sharp edges even in the absence of the absorbing layers at the edges, thus materialising the so-called ‘acoustic black holes’ for bending waves. …”
Get full text
Default Conference proceeding -
39
An automatic design optimization procedure to minimize fillet bending stresses in involute spur gears
Published 1987Get full text
Default Article -
40
A design optimisation procedure to minimize fillet bending stresses in an epicyclic gear system
Published 1991Get full text
Default Article -
41
CVBEM solution for De Saint-Venant orthotropic beams under coupled bending and torsion
Published 2015Get full text
Default Article -
42
Data-driven bending angle prediction of soft pneumatic actuators with embedded flex sensors
Published 2016“…The aim is to ultimately create a more controllable version of this class of soft pneumatic actuators with embedded sensing capabilities, to act as compliant soft gripper fingers that can be used in applications requiring both a ‘soft touch’ as well as more controllable object manipulation.…”
Get full text
Default Conference proceeding -
43
Characterisation of mechanical behaviour and damage analysis of 2D woven composites under bending
Published 2015“…Mechanical behaviour of these materials was quantified by carrying out tensile and large-deflection bending tests. A substantial difference was found between the materials' tensile and flexural properties due to a size effect and stress stiffening of thin laminates. …”
Get full text
Default Article -
44
Effect of graphene-oxide enhancement on large-deflection bending performance of thermoplastic polyurethane elastomer
Published 2015“…The average residual height and final specific plastic dissipation energy for PU were approximately 5.6 and 17.7 times as large as those for the studied GO/PU composite. …”
Get full text
Default Article -
45
New four-point bending based method for impact damage tolerance assessment of sandwich panels
Published 2017Subjects: Get full text
Default Conference proceeding -
46
A finite element analysis of bending stresses induced in external and internal involute spur gears
Published 1991Get full text
Default Article -
47
A numerical study on the influence of internal corrugated reinforcements on the biaxial bending collapse of thin-walled beams
Published 2019“…This work considers different internal reinforcements (C-section and corrugated) to improve the energy absorption properties of thin walled rectangular beams under uniaxial and biaxial deep bending collapse, for loading angles ranging from 0 to 90 deg, in 15° increments. …”
Get full text
Default Article -
48
Optimized interaction equations for more efficient design of CFS channels under combined compression and biaxial bending
Published 2024“…This study aims to develop optimized interaction equations for more efficient design of cold-formed steel (CFS) lipped channel beam-columns under combined compressive load and biaxial bending, aligned with the direct strength method (DSM). …”
Get full text
Default Article -
49
Bending and crumpling deformation study of the resonant characteristic and SAR for a 2.4 GHZ textile antenna
Published 2015“…The peak SAR10g demonstrates increment up to 65.7% and 48.7% under bending and crumpling deformation respectively. …”
Get full text
Default Article -
50
Dynamic scaling of out-of-plane fluctuations in freestanding graphene
Published 2022Get full text
Default Article