Hydrogen bombardment-induced nano blisters in multilayered Mo/Si coatings by Bo Yuan, Shuai Wang, Christopher Harvey, Xiaofeng Guo, Simon Wang

Subjects: Get full text

Nano blisters in multilayer Mo/Si coatings due to bombardment of hydrogen ions by Bo Yuan, Tianyu Chen, Joe Britton, Christopher Harvey, Xiaofeng Guo, Hezong Li, Jingjing Cao, Simon Wang

Get full text

Nano blisters in multilayer Mo/Si coatings due to bombardment of hydrogen ions by Bo Yuan, Tianyu Chen, Joe Britton, Christopher Harvey, Xiaofeng Guo, Hezong Li, Jingjing Cao, Simon Wang

“…A mechanical model is developed to determine the mode I and II fracture toughness GIc and GIIc from experimental test data. …”
Get full text

Effect of micro/nano-SiCP on microstructure and properties of electroless Ni-P-SiCP composite coatings by Shuang Chao, Jingjing Cao, Hezong Li, Lei Fan, Junheng Yang, Christopher Harvey

Subjects: Get full text

Efficient W and Mo deposition and separation with simultaneous hydrogen production in stacked bioelectrochemical systems by Liping Huang, Ming Li, Yuzhen Pan, Yong Shi, Xie Quan, Gianluca Li-Puma

“…The control experiments with either the 1# or 2# unit and a mixture of W(VI) and Mo(VI) deposited 15.3 ± 1.7% (W) and 60.1 ± 1.6% (Mo) (1# only), and 12.9 ± 1.3% (W) and 56.1 ± 2.0% (Mo) (2# only). …”
Get full text

High-entropy silicide ceramics developed from (TiZrNbMoW)Si2 formulation doped with aluminum by Yuan Qin, Jin-Cheng Wang, Ji-Xuan Liu, Xiao-Feng Wei, Fei Li, Guo-Jun Zhang, Chengxi Jing, Jiawei Zhao, Houzheng Wu

“…For a designed chemical formula as (Ti0.2Zr0.2Nb0.2Mo0.2W0.2)Si2, the as-synthesized HES showed a formula as (Ti0.22Zr0.06Nb0.29Mo0.22W0.21)Si2 with zirconium partially oxidized into zirconia. …”
Get full text

Porosity developments within 9Cr-1Mo steel exposed to CO2 by Lawrence Coghlan, Rebecca Higginson, Mark Jepson, Aya Shin, Jonathan Pearson

“…The porosity of the duplex oxide was measured using scanning electron microscopy of oxides on 9Cr steel samples oxidised in a CO2 atmosphere. Results show that samples which have suffered breakaway oxidation show larger oxide scales with alternating Fe/Cr bands whereas samples which have yet to suffer from breakaway show higher peak porosity values but thinner oxide scales. …”
Get full text

Dispersion of complex carbides at the oxidation front during the oxidation of 9Cr-1Mo steel by Lawrence Coghlan, S Yan, Aya Shin, J Pearson, Mark Jepson, Rebecca Higginson

“…Complex multi-elemental carbides form showing a range of compositions, with some showing coring/elemental segregation. …”
Get full text

Control of Mose2 formation in hydrazine-free solution-processed CIS/CIGS thin film solar cells by Sona Ulicna, Panagiota Arnou, Alexander Eeles, Mustafa Togay, Lewis Wright, Ali Abbas, Andrei Malkov, Michael Walls, Jake Bowers

Subjects: Get full text

The effect of microstructure on the oxidation and carburisation of 9Cr-1Mo steel exposed to CO₂ by Lawrence Coghlan, Sabrina Yan, Aya Shin, Jonathan Pearson, Mark Jepson, Rebecca Higginson

“…This elemental segregation influences the oxidation characteristics of the 9Cr-1Mo steel and the morphology of the internal oxidation zone, and subsequently the spinel structure shows ghosts of the prior substrate microstructure.…”
Get full text

A rechargeable Mg2+/Li+ hybrid battery based on sheet-like MoSe2/C nanocomposites cathode by Jing-Jing Fan, Shou-Yu Shen, Yuan Chen, Li-Na Wu, Jun Peng, Xin-Xing Peng, Chen-Guang Shi, Ling Huang, Wen-Feng Lin, Shi-Gang Sun

Subjects: Get full text

Acetate production from inorganic carbon (HCO3-) in photo-assisted biocathode microbial electrosynthesis systems using WO3/MoO3/g-C3N4 heterojunctions and Serratia marcescens speci... by Zhenghong Cai, Liping Huang, Xie Quan, Zongbin Zhao, Yong Shi, Gianluca Li-Puma

Get full text

Supplementary Information Files for 'Acetate production from inorganic carbon (HCO3-) in photo-assisted biocathode microbial electrosynthesis systems using WO3/MoO3/g-C3N4 heteroju... by Zhenghong Cai, Liping Huang, Xie Quan, Zongbin Zhao, Yong Shin, Gianluca Li-Puma

Get full text

Characterisation of a High-Power Impulse Magnetron Sputtered C/Mo/W wear resistant coating by transmission electron microscopy by Jo Sharp, Itzel Castillo Müller, Paranjayee Mandal, Ali Abbas, Magnus Nord, Alastair Doye, Arutiun Ehiasarian, Papken Hovsepian, Ian MacLaren, W. Mark Rainforth

“…Thin films of C/Mo/W deposited using combined UBM/HIPIMS sputtering show 2–8 nm clusters of material richer in Mo and W than the matrix (found by EDS microanalysis), with structures that resemble graphitic onions with the metal atoms arranged regularly within them. …”
Get full text

Assessment of corrosive attack of Fe9Cr1Mo alloys in pressurised CO₂ for prediction of breakaway oxidation by Yilun Gong, S.P.A. Gill, Sabrina Yan, Rebecca Higginson, J Sumner, N.J. Simms, H. Larsson, Aya Shin, J.M. Pearson, David Young, C Atkinson, A.C.F. Cocks, R.C. Reed

Get full text

Using a plasma FIB system to characterise the porosity through the oxide scale formed on 9Cr-1Mo steel exposed to CO₂ by Lawrence Coghlan, Aya Shin, Jonathan Pearson, Mark Jepson, Rebecca Higginson

“…Focused ion beam microscopy and scanning electron microscopy have been used to characterise the porosity of the oxide scale of an experimental 9Cr–1Mo steel sample exposed for 4580 h in a CO2-rich environment. …”
Get full text

Supplementary information files for Assessment of corrosive attack of Fe9Cr1Mo alloys in pressurised CO2 for prediction of breakaway oxidation by Yilun Gong, S.P.A. Gill, Sabrina Yan, Rebecca Higginson, J Sumner, N.J. Simms, H. Larsson, Aya Shin, J.M. Pearson, David Young, C Atkinson, A.C.F. Cocks, R.C. Reed

Get full text

High quality factor cold sintered Li2MoO4BaFe12O19 composites for microwave applications by Sinan S. Faouri, Ali Mostaed, Julian S. Dean, Dawei Wang, Derek C. Sinclair, Shiyu Zhang, William Whittow, J. C. Vardaxoglou, Ian M. Reaney

“…Ceramics-ceramic composites in series (1-x)Li2MoO4-xBaFe12O19 (LMO-BF12, 0.00 ≤ x ≤ 0.15) have been cold sintered at 120 °C and their structure and properties characterized. …”
Get full text

Multi-material additive manufacturing of low sintering temperature Bi2Mo2O9 ceramics with Ag floating electrodes by selective laser burnout by Reza Gheisari, Henry Chamberlain, George Chi-Tangyie, Shiyu Zhang, Athanasios Goulas, Chih-Kuo Lee, Tom Whittaker, Dawei Wang, Annapoorani Ketharam, Avishek Ghosh, Vaidhy Vaidhyanathan, William Whittow, Darren Cadman, J. C. Vardaxoglou, Ian M Reaney, Daniel Engstrom

“…Slurry-based AM and selective laser burnout (SLB) were used to fabricate bulk dielectric, Bi2Mo2O9 (BMO, sintering temperature = 620–650°C, εr = 38) with silver (Ag) internal floating electrodes. …”
Get full text

Additively manufactured ultra-low sintering temperature, low loss Ag₂Mo₂O₇ ceramic substrates by Athanasios Goulas, George Chi-Tangyie, Dawei Wang, Shiyu Zhang, Annapoorani Ketharam, Vaidhy Vaidhyanathan, Ian M Reaney, Darren Cadman, William Whittow, J. C. Vardaxoglou, Daniel Engstrom

“…An optimum densification conditions of 460 °C / 2 h was determined, resulting in relative permittivity, εr = 13.45, dielectric loss, tanδ = 0.0005, microwave quality factor, Q × f = 17,056 GHz and the temperature coefficient of resonant frequency τf = −121 ppm/°C. …”
Get full text

Microstructure and microwave dielectric properties of 3D printed low loss Bi₂Mo₂O₉ ceramics for LTCC applications by Athanasios Goulas, George Chi-Tangyie, Dawei Wang, Shiyu Zhang, Annapoorani Ketharam, Vaidhy Vaidhyanathan, Ian Reaney, Darren Cadman, William Whittow, J. C. Vardaxoglou, Daniel Engstrom

Subjects: Get full text

Supplementary Information Files for ' Multi-material additive manufacturing of low sintering temperature Bi2Mo2O9 ceramics with Ag floating electrodes by selective laser burnout' by Reza Gheisari, Henry Chamberlain, George Chi-Tangyie, Shiyu Zhang, Athanasios Goulas, Chih-Kuo Lee, Tom Whittaker, Dawei Wang, Annapoorani Ketharam, Avishek Ghosh, Vaidhy Vaidhyanathan, William Whittow, Darren Cadman, J. C. Vardaxoglou, Ian M. Reaney, Daniel Engstrom

“…Slurry-based AM and selective laser burnout (SLB) were used to fabricate bulk dielectric, Bi2Mo2O9 (BMO, sintering temperature = 620–650°C, εr = 38) with silver (Ag) internal floating electrodes. …”
Get full text

The mechanics of takeoffs in the aerials event of freestyle skiing by Philip E. Jones

“…Experimental values for the height of the centre of mass (CoM), moment of inertia (MoI), initial linear velocity (VG) and initial angular velocity (ωpg) were used as model inputs. …”
Get full text

Deposition and application of a Mo–N back contact diffusion barrier yielding a 12.0% efficiency solution-processed CIGS solar cell using an amine–thiol solvent system by Sona Ulicna, Panagiota Arnou, Ali Abbas, Mustafa Togay, Liam Welch, Martin Bliss, Andrei Malkov, Michael Walls, Jake Bowers

“…The use of a Mo–N barrier for solution-processed CIGS results in reduced MoSe2 formation. …”
Get full text

Measuring dynamic properties of rubbers filled with silanised silica nanofiller by Saeed Ostad Movahed, Ali Ansarifar, Mo Song

Get full text

Preparation and characterization of high performance exfoliated montmorillonite/silicone rubber nanocomposites with enhanced mechanical properties by Nik I. Nik Ismail, Ali Ansarifar, Mo Song

Get full text

Effect of hybrid reinforcement based on precipitated silica and montmorillonite nanofillers on the mechanical properties of a silicone rubber by Nik I. Nik Ismail, Ali Ansarifar, Mo Song

Get full text

Improving heat ageing and thermal properties of silicone rubber using montmorillonite clay by Ali Ansarifar, Nik I. Nik Ismail, Mo Song

Get full text

Hybrid reinforcement of silicone rubber by Ali Ansarifar, Nik I. Nik Ismail, Mo Song

Get full text

Development of a crosslinked quaternized poly(styrene-b-isobutylene-b-styrene)/graphene oxide composite anion exchange membrane for direct alkaline methanol fuel cell application by Pei Dai, Zhao-Hua Mo, Ri-Wei Xu, Shu Zhang, Xiao Lin, Wen-Feng Lin, Yi-Xian Wu

Get full text

The anthropometry of economical running by Matthew I Black, Sam Allen, Steph Forrester, Jonathan Folland

“…Measurements of anthropometry, including segment lengths, perimeters, masses and moments of inertia (MoI), and body composition were obtained using tape-based measurements and dual-energy x-ray absorptiometry (DXA). …”
Get full text

Structural and chemical evolution of the CdS:O window layer during individual CdTe solar cell processing steps by Ali Abbas, Daniel M. Meysing, M.O. Reese, Teresa M. Barnes, Michael Walls, Colin A. Wolden

Get full text

The affect of ash chemistry and deposits from co-firing biomass and coal in power plant systems by Victoria F. Lay

“…Analysis of 15Mo3 alloy corrosion coupons with fly ash deposited onto the surface, alongside the interactions between gas phases and coupons, deposits and coupons, and gas phases and deposits, showed that some oxidation/reduction of the metal had occurred. …”
Get full text

Cellular electron transfer in anaerobic photo-assisted biocathode microbial electrosynthesis systems for acetate production from inorganic carbon (HCO₃^–) by Liping Huang, Zijing Xu, Yinghong Shi, Yu Zhang, Gianluca Li-Puma

“…The crucial role played by the cellular electron transfer in the production of acetate from aqueous inorganic carbon (HCO3–, bicarbonate) in anaerobic photo-assisted microbial electrosynthesis (MES) biocathodes incorporating a WO3/MoO3/g-C3N4 Z-scheme heterojunction and either Serratia marcescens Q1 or Stenotrophomonas sp. …”
Get full text

Development of arsenic doped Cd(Se,Te) absorbers by MOCVD for thin film solar cells by O Oklobia, G Kartopu, S Jones, P Siderfin, B Grew, HKH Lee, WC Tsoi, Ali Abbas, Michael Walls, DL McGott, MO Reese, SJC Irvine

Get full text

Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning by Riaz Muhammad, Mohammad Sajid Hussain, Agostino Maurotto, Carsten Siemers, Anish Roy, Vadim Silberschmidt

“…Therefore, a new alloy based on Ti 6Al 2Sn 4Zr 6Mo, namely Ti 6Al 7Zr 6Mo 0.9La, was developed; it shows enhanced machinability generating short chips during metal cutting, which prevents entanglement with cutting tools improving productivity. …”
Get full text

Effect of intense pulsed ion beams irradiation on the oxidation behavior of γ′-based superalloy by Hongtao Zhang, Tianmin Wang, Cong Wang, Baoxi Han, Sha Yan, Weijiang Zhao, Yafang Han

“…The improvement of the oxidation resistance can be attributed to a change in the oxidation products from a three-layered scale of Ni-rich oxides for the unirradiated coupon to a two-layered scale of Mo- and Al-rich oxides. …”
Get full text

BTZ-copolymer loaded graphene aerogel as new type Green and metal-free visible light photocatalyst by Chi Him A. Tsang, John Tobin, Jin Xuan, Filipe Vilela, Haibao Huang, Dennis Y. Leung

“…SEM, TEM, XPS, EDX mapping results further showed the successful loading of the BTZ-based CMP in the GA array. …”
Get full text

A multi-organ nucleus segmentation challenge by Neeraj Kumar, Ruchika Verma, Deepak Anand, Yanning Zhou, Omer Fahri Onder, Efstratios Tsougenis, Hao Chen, Pheng-Ann Heng, Jiahui Li, Zhiqiang Hu, Yunzhi Wang, Navid Alemi Koohbanani, Mostafa Jahanifar, Neda Zamani Tajeddin, Ali Gooya, Nasir Rajpoot, Xuhua Ren, Sihang Zhou, Qian Wang, Dinggang Shen, Cheng-Kun Yang, Chi-Hung Weng, Wei-Hsiang Yu, Chao-Yuan Yeh, Shuang Yang, Shuoyu Xu, Pak Hei Yeung, Peng Sun, Amirreza Mahbod, Gerald Schaefer, Isabella Ellinger, Rupert Ecker, Orjan Smedby, Chunliang Wang, Benjamin Chidester, That-Vinh Ton, Minh-Triet Tran, Jian Ma, Minh N Do, Simon Graham, Quoc Dang Vu, Jin Tae Kwak, Akshaykumar Gunda, Raviteja Chunduri, Corey Hu, Xiaoyang Zhou, Dariush Lotfi, Reza Safdari, Antanas Kascenas, Alison O'Neil, Dennis Eschweiler, Johannes Stegmaier, Yanping Cui, Baocai Yin, Kailin Chen, Xinmei Tian, Philipp Gruening, Erhardt Barth, Elad Arbel, Itay Remer, Amir Ben-Dor, Ekaterina Sirazitdinova, Matthias Kohl, Stefan Braunewell, Yuexiang Li, Xinpeng Xie, Linlin Shen, Jun Ma, Krishanu Das Baksi, Mohammad Azam Khan, Jaegul Choo, Adrian Colomer, Valery Naranjo, Linmin Pei, Khan M Iftekharuddin, Kaushiki Roy, Debotosh Bhattacharjee, Anibal Pedraza, Maria Gloria Bueno, Sabarinathan Devanathan, Saravanan Radhakrishnan, Praveen Koduganty, Zihan Wu, Guanyu Cai, Xiaojie Liu, Yuqin Wang, Amit Sethi

“…We summarize the results of MoNuSeg 2018 Challenge whose objective was to develop generalizable nuclei segmentation techniques in digital pathology. …”
Get full text

Assessment of warship safety case procedures by Robert A. Irvine

“…Following the repeal of Crown immunity, which raised the possibility of servicemen suing the Ministry of Defence (MoD) for injuries caused by military service, the Secretary of State for Defence instigated a reform of the management of safety in HM warships. …”
Get full text

Body composition reference charts for infants from birth to 24 months: Multicenter Infant Body Composition Reference Study by Alexia J. Murphy-Alford, Will Johnson, Lukhanyo H. Nyati, Iná S. Santos, Andrew P. Hills, Shabina Ariff, V. Pujitha Wickramasinghe, Rebecca Kuriyan, Nishani Lucas, Caroline Sousa Costa, Christine Slater, Tanvir Ahmad, Nuala M. Byrne, Priscilla J. Divya, Anura V. Kurpad, Leila Cheikh Ismail, Cornelia U. Loechl, Shane A. Norris

“…Reference charts and centiles were constructed for body composition using the lambda-mu-sigma method (LMS).  Results: Sex-specific reference charts were produced for fat mass index (FMI), fat-free mass index (FFMI), and percent fat mass (%FM) for 0-6 mo (n = 470 infants; 1,899 observations) and 3-24 mo (n = 1,026 infants; 3,690 observations). …”
Get full text