Fatigue Testing of a Stiffened Lap Joint Curved Fuselage Structure

• Published in: Journal of aircraft 2007-05, Vol.44 (3), p.750-757
• Main Authors: Ahmed, Abubaker, Bakuckas, John G, Awerbuch, Jonathan, Lau, Alan C, Tan, Tein-Min
• Format: Article
• Language: English
• Subjects: Aircraft; Exact sciences and technology; Fatigue failure; Fracture mechanics (crack, fatigue, damage...); Fundamental areas of phenomenology (including applications); Load; Materials fatigue; Physics; Solid mechanics; Structural and continuum mechanics; Tests
• ISSN: 0021-8669; 1533-3868
• DOI: 10.2514/1.17162

In April 1988, Aloha Airlines flight 243 experienced an explosive midair decompression that resulted in the separation of an 18-foot section of the fuselage crown of the Boeing 737 airplane. Investigations revealed that the linkup of small cracks emanating from multiple rivet holes in a debonded lap joint contributed to the catastrophic failure. This cracking scenario, known as multiple-site damage, is one of two sources of widespread fatigue damage; a type of structural degradation characterized by the simultaneous presence of fatigue cracks at multiple structural elements that are of sufficient size and density whereby the structure will no longer meet its damage tolerance requirement. This study, sponsored by the National Aging Aircraft Research Program initiated by the Federal Aviation Administration in response to the Aloha accident, investigates multiple-site damage initiation and growth behavior in a pristine narrow-body fuselage panel. The test panel, a curved 6 x 10 ft stiffened structure containing six frames, seven stringers, and a longitudinal lap joint, was tested at the Federal Aviation Administration Full-Scale Aircraft Structural Test Evaluation and Research facility. The panel was subjected to a fatigue test with constant-amplitude cyclic loading, simulating the major modes of load associated with fuselage pressurization. Nondestructive inspections were conducted during the fatigue test to detect and monitor crack formation and growth. Multiple-site damage cracks were visually detected after about 80% of the fatigue life. Cracks developed and linked in the upper rivet row of the lap joint in the outer skin layer and formed a long fatigue crack before the termination of the fatigue test. A residual strength test was then conducted by subjecting the panel to quasi-static loads until catastrophic failure. Fractographic examinations were conducted to reconstruct crack growth history. Preliminary results show multiple crack origins and significant subsurface crack growth. [PUBLICATION ABSTRACT]