Influence of coupling agents and treatments on the mechanical properties of cellulose fiber-polystyrene composites

• Published in: Journal of applied polymer science 1989-01, Vol.37 (3), p.751-775
• Main Authors: Maldas, D., Kokta, B. V., Daneault, C.
• Format: Article
• Language: English
• Subjects: Applied sciences; Exact sciences and technology; Forms of application and semi-finished materials; Polymer industry, paints, wood; Reinforced plastics; Technology of polymers
• ISSN: 0021-8995; 1097-4628
• DOI: 10.1002/app.1989.070370313

Wood fibers of aspen in the form of chemithermomechanical pulp (CTMP) and Tembec 6816 have been used as reinforcing fillers in different varieties of polystyrene. The tensile strength, elongation, and energy at maximum point, as well as tensile modulus at 0.1% strain is reported. Also revealed is the optimum condition of compression molding. The influence of different coupling agents, such as poly[methylene(polyphenyl isocyanate)], silanes (A‐172, A‐174, A‐1100), and grating on the mechanical properties of composites is discussed. The extent of increase in mechanical properties depends on the weight percentage of fibers, the concentration of coupling agents, and the grafting level (add‐on %). Coating followed by an isocyanate treatment appears to be the best treatment. In addition, the isocyanate treatment and grafting are superior to the silane treatment. Experimental results are explained on the basis of possible interactions among cellulose fiber‐coupling agent‐polymer in the interfacial area.