Tritium/hydrogen barrier development

• Published in: Fusion engineering and design 1995-03, Vol.28, p.190-208
• Main Authors: Hollenberg, G.W, Simonen, E.P, Kalinin, G, Terlain, A
• Format: Article
• Language: English
• ISSN: 0920-3796; 1873-7196
• DOI: 10.1016/0920-3796(95)90039-X

A review of the hydrogen permeation barriers which can be applied to the structural metals used in fusion power plants is presented. Both implanted and chemically available hydrogen isotopes must be controlled in fusion plants. The need for permeation barriers appears strongest in Pb-17Li blanket designs, although barriers are also necessary for other blanket and coolant systems. Barriers which provide greater than a 1000- fold reduction in the permeation of structural metals are desired. In laboratory experiments, aluminide and titanium ceramic coatings provide permeation reduction factors (PRFs) of 1000 to over 100 000 with a wide range of scatter. The rate-controlling mechanism for hydrogen permeation through these barriers may be related to the number and type of defects in the barriers. Although these barriers appear robust and resistant to liquid metal corrosion, irradiation tests which simulate blanket environments result in very low PRFs in comparison with laboratory experiments, i.e. less than 150. It is anticipated from fundamental research activities that the radiation- and electric-field-induced enhancement of hydrogen diffusion in oxides may contribute to the lower PRFs during in-reactor experiments.