Hydrogenation catalysts based on nickel and rare earth oxides

• Published in: Applied catalysis. A, General General, 1993-07, Vol.101 (1), p.73-93
• Main Authors: Wrobel, G., Sohier, M.P., D'Huysser, A., Bonnelle, J.P., Marcq, J.P.
• Format: Article
• Language: English
• Subjects: electron microscopy; hydrogen storage; nickel-cerium oxides; unsaturated hydrocarbon hydrogenation; XPS; XRD
• ISSN: 0926-860X; 1873-3875
• DOI: 10.1016/0926-860X(93)80139-H

In a previous article we selected a preparation process of cerium and nickel oxides which permits catalysts to be obtained which contain as much hydrogen as the intermetallic compounds with the same composition, and which are more active in benzene hydrogenation. Moreover the catalysts' behaviour varies with the Ni/Ce ratio ( x) and at least two zones can be distinguished. In the present paper we have found correlations between catalytic activity, hydrogen content and some physical and chemical characteristics of the solids, both in the oxidized and reduced states. The techniques used were electron microscopy (TEM, SEM, EPMA), X-ray diffraction and X-ray photoelectron spectroscopy. Whatever the method, the catalysts are classified into two families. For x⩽ 0.5 nickel is inserted in the ceria lattice to form a solid solution. Above 0.5, both crystallized nickel oxide and solid solution coexist. In the reduced state anionic vacancies able to receive hydrogen, probably in an hydridic form, are created in the bulk and at the surface of the solid solution. The catalytic results can then be explained by assuming the existence of three kinds of active sites which differ from each other in terms of the environment of nickel, and an explanation for the higher efficiency of the catalyst with x =5 is advanced. Finally the situation is shown to be almost identical in ceria-supported nickel catalysts.