Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting

• Published in: Additive manufacturing 2018-08, Vol.22, p.265-278
• Main Authors: Gu, Dongdong, Shi, Qimin, Lin, Kaijie, Xi, Lixia
• Format: Article
• Language: English
• Subjects: Mechanical property; Microstructural evolution; Ni-based superalloy; Selective laser melting; Thermal mechanisms
• ISSN: 2214-8604; 2214-7810
• DOI: 10.1016/j.addma.2018.05.019

[Display omitted] •Microstructure evolution in the molten pool of SLM-processed parts was disclosed.•Variation of microhardness with local zone within the molten pool were measured.•Thermal behavior within the molten pool was quantitatively analyzed.•Relationship among microstructure, properties and thermal behavior was discussed. This work presented a comprehensive study of microstructural evolution, microhardness and quantitative thermodynamic analysis within the molten pool during Selective Laser Melting (SLM) of Inconel 718 parts. Microstructures and corresponding microhardness of different zones within the molten pool experienced the following evolution: fine cellular dendrites or equiaxed grains on the top surface (387HV); columnar dendrites with single direction of grain growth at the bottom (337HV); columnar dendrites with multiple directions of grain growth at the edge of the molten pool (340HV-350HV); microstructures between cellular and columnar grains around the center of the molten pool (363HV). The impact of Gaussian-distributed laser energy and relatively weak thermal conductivity and convection of Inconel 718 contributed to the variation of temperature gradient at different zones within the molten pool. The formation of different kinds of microstructures in the molten pool was controlled by the temperature gradient (which determined the direction of grain growth) and the cooling rate (which determined the size of grain growth). The variation of microhardness within the molten pool was ascribed to the number of grain boundaries and the stress characteristics of different kinds of microstructures under mechanical load. The zones with fine cellular grains had elevated mechanical performance due to the superior capability to endure the load. This work hopefully provides scientific and theoretical support for SLM-processed Inconel 718 parts with favorable properties.