One-pot synthesis of hematite-alumina hollow sphere composite by ultrasonic spray pyrolysis technique with high adsorption capacity toward PAHs

• Published in: Advanced powder technology : the international journal of the Society of Powder Technology, Japan Japan, 2021-04, Vol.32 (4), p.1060-1069
• Main Authors: Vojoudi, Hossein, Ghasemi, Jahan B., Hajihosseinloo, Ahmadreza, Bastan, Bahareh, Badiei, Alireza
• Format: Article
• Language: English
• Subjects: Alumina; Hematite; Hollow sphere particles; PAHs removal; Ultrasonic spray pyrolysis
• ISSN: 0921-8831; 1568-5527
• DOI: 10.1016/j.apt.2021.02.015

[Display omitted] •Using ultrasonic spray pyrolysis technique for preparation of composite.•Obtaining separated hollow sphere particles of Al2O3 – Fe2O3 nanocomposite.•PAHs removal by Al2O3 – Fe2O3 nanocomposite. A hybrid nanocomposite of alumina and hematite was synthesized by ultrasonic spray pyrolysis technique. The study of microscopic images, mapping analysis, and XRD patterns revealed that the Al2O3 – Fe2O3 nanocomposite was composed of separated spherical particles with a thin layer ball-shaped structure that metal oxides are uniformly distributed in the wall of hollow sphere particles, led to a coherent and monotonous construction. A series of coefficients of equilibrium sorption of polycyclic aromatic hydrocarbons (PAHs) as hazardous materials were measured on the prepared composite material in a batch technique. The free or pure Al2O3 or Fe2O3 showed negligible removal efficiency for the mentioned analytes. The various significant variables, such as initial analyte concentration, solution pH, adsorbent dose, and contact time to remove analyte, were studied in the aqueous solutions. Adsorption data were modeled to Langmuir, Freundlich, and Temkin isotherms, and a good correlation found in the case of Langmuir isotherm and adsorption capacity for anthracene, phenanthrene, and naphthalene were 370, 333, and 322 mg g−1, respectively. Investigation of the kinetic models proved a pseudo-second-order, and the prepared adsorbent can be reused more than 7 times without a significant decrease of adsorption performance.