Loading…
Facile preparation of tungsten oxide doped TiO2 photocatalysts using liquid phase plasma process for enhanced degradation of diethyl phthalate
[Display omitted] •Liquid phase plasma (LPP) process was introduced to dope tungsten oxide on bare TiO2.•The tungsten element was existed in the form of tungsten trioxide on the surface of TiO2.•The band gap of photocatalysts was decreased with increasing tungsten composition.•The degradation rate o...
Saved in:
Published in: | Chemical engineering journal (Lausanne, Switzerland : 1996) Switzerland : 1996), 2019-12, Vol.377, p.120087, Article 120087 |
---|---|
Main Authors: | , , , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | [Display omitted]
•Liquid phase plasma (LPP) process was introduced to dope tungsten oxide on bare TiO2.•The tungsten element was existed in the form of tungsten trioxide on the surface of TiO2.•The band gap of photocatalysts was decreased with increasing tungsten composition.•The degradation rate of modified TiO2 was significantly improved under blue LED lamp.•Ethyl salicylate and phthalic acid were observed during the degradation of diethyl phthalate.
In a present study, tungsten oxide was employed to improve the removal efficiency of the parent compound diethyl phthalate as well as to reduce the band gap energy of the original photocatalyst titanium dioxide. The modified photocatalyst was prepared by depositing tungsten oxide onto titanium dioxide through the liquid phase plasma. The decomposition of the parent compound was examined by varying the loading of tungsten oxide in the photocatalyst surface under different light sources, UV and blue light sources. Results showed that the band gap energy in the modified photocatalyst was lower than that of the original photocatalyst, which was attributed to increased loading of tungsten oxide in the modified photocatalyst surface resulted from an increase in the initial precursor concentrations. Tungsten doped in the photocatalyst surface existed in the form of the WO3, which led to a decrease in the specific surface area for the modified photocatalyst. The degradation performance of the parent compound increased in response to an increase in the amount of tungsten oxide under blue light, but decreased with increasing the loading of tungsten oxide under UV light. Two intermediates observed during the photocatalytic degradation appeared to be involved in the proposed degradation pathway. |
---|---|
ISSN: | 1385-8947 1873-3212 |
DOI: | 10.1016/j.cej.2018.10.024 |