Investigation of dynamic compression properties of lightweight engineered geopolymer composites containing different ceramsites (LW-EGC)

• Published in: Construction & building materials 2024-04, Vol.425, p.136001, Article 136001
• Main Authors: Cheng, Zhijun, An, Junpeng, Li, Faping, Lu, Yiyan, Li, Shan
• Format: Article
• Language: English
• Subjects: Ceramsite; DIF; Dynamic compression properties; Lightweight engineered geopolymer composites; SHPB
• ISSN: 0950-0618; 1879-0526
• DOI: 10.1016/j.conbuildmat.2024.136001

Lightweight engineering geopolymer composites (LW-EGC) can contribute to green building materials products by taking advantage of the advantages of man-made ceramsite and geopolymers. In this paper, an active "sacrifice" method was proposed, which is based on the idea that low elastic modulus ceramsites are preferentially damaged or ruptured during the impact loading process, thus absorbing and dissipating the impact energy. LW-EGC was enhanced by PVA fiber with volume fraction of 2% and multi-walled carbon nanotubes with mass fraction of 0.15%. The dynamic compression properties of LW-EGC containing different ceramsites were studied by using Φ100 mm split Hopkinson pressure bar (SHPB) test device. The compression characteristics of the LW-EGC under an impact load were evaluated, including the strain rate, dynamic stress–strain relationship, elastic modulus, dynamic increase factor (DIF), energy absorption, and failure patterns. The results showed that the dynamic peak stress, dynamic peak strain, DIF, energy absorption and damage degree of LW-EGC all increased with the increase of strain rate, showing obvious strain-rate sensitivity. At high strain rate, the dynamic elastic modulus mainly showed softening effect. At the same strain rate, the impact resistance of LW-EGC-1 containing fly ash ceramsite was the best, and the damage degree of LW-EGC-3 containing shale ceramsite was the lowest. Empirical DIF formulas of the LW-EGC was proposed; the DIF increased approximately linearly with the strain rate in a logarithmic manner. •Effects of strain rates and ceramsite types on the dynamic properties of LW-EGC were studied.•The strain rate on the compressive properties ranges from 87.14 s−1 to 249.93 s−1.•Compressive properties of LW-EGC were sensitive to loading rates.•A DIF prediction model suitable for LW-EGC was proposed.•Energy absorption capacity of LW-EGC was studied.