Iron dust explosion characteristics with small amount of nano-sized Fe2O3 and Fe3O4 particles

• Published in: Fuel (Guildford) 2022-09, Vol.324, p.124786, Article 124786
• Main Authors: Guo, Yongzheng, Ren, Kaiyue, Wei, Aizhu, Tao, Chun, Huang, Weixing, Zhao, Peng, Wu, Dejian
• Format: Article
• Language: English
• Subjects: Combustion duration time; Explosion products; Iron dust; Iron oxides; MEC; Pressure rise rate
• ISSN: 0016-2361
• DOI: 10.1016/j.fuel.2022.124786

•Two methods were used as the explosion criteria to determine the MEC.•A simplified flame propagation model was used for the iron dust explosion.•The explosion residues were found to grow up 4–6 times of the iron dust for the first time.•The secondary acceleration of dP/dt of iron dust explosion was found for the first time.•Fe3O4 has a better inerting effect than Fe2O3 for iron dust explosion moderation. Iron powder, as one of the most abundant metal fuels that can be used as recyclable carriers of clean energy, is a promising alternative to fossil fuels in a future low-carbon economy. It may pose a potential explosion hazard during the process of processing, storage, transport, and reduction/oxidation (redox). The explosion characteristics of iron dust in air were undertaken via a 20 L spherical explosion chamber with an emphasis on minimum explosion concentration (MEC) of iron dust. The alternative method of combustion duration time (tc) was used to determine MEC and compared with the standardized over pressure method. Two kinds of nano-sized iron oxides (Fe2O3 and Fe3O4) were used as inertants to determine the inhibition effect of different oxidation products. The iron dust explosion products with various shapes and sizes were found to be able to grow up 4–6 times of the iron dust for the first time. Adding small amount of Fe2O3 or Fe3O4 could reduce the explosion severity and sensitivity of iron dust. The MEC data determined by both methods were comparable. The addition of 5 % oxide has obvious inhibition effect under 1500 g/m3 concentration. With the increase of oxide concentration to 10 %, the inerting effect increases, and the MEC of iron dust increases more than 3 times. The increase of dust concentration will weaken the inerting effect. When the concentration increases from 500 g/m3 to 3000 g/m3, the weakening effect of 10 % Fe2O3 on the explosion pressure decreases from 38.45 % to 2.24 %, and 10 % Fe3O4 decreases from 46.21 % to 10.63 %. Unlike coal, biomass or aluminum dusts, the iron dust explosion was found to have a unique secondary acceleration of pressure rise rate for the first time. These results provide a fundamental basis to mitigate the iron dust explosion via solid inerting method without adding extra elements.