Heat transfer and fluid flow analysis in circular tubes with multi-delta-winglets vortex generators

• Published in: International communications in heat and mass transfer 2024-12, Vol.159, p.108267, Article 108267
• Main Authors: Feng, Jia Jie, Teh, Chun Ping, Ng, Khai Ching, Jen-Haw, Jansen Chong, Xiao, Dong, Abakr, Yousif Abdalla, Chan, Andy, Chen, Baiman
• Format: Article
• Language: English
• Subjects: Fluid flow; Heat transfer; Longitudinal vortex; Pressure drop; Thermal enhancement factor; Winglet vortex generator
• ISSN: 0735-1933
• DOI: 10.1016/j.icheatmasstransfer.2024.108267

In this work, the positive projection plane of self-join winglet vortex generator is modified into a non-circular design, aiming to provide novel insights into optimizing vortex interaction in tubes equipped with winglets. The experimental and numerical investigation of heat transfer and fluid flows in circular tubes equipped with multi-delta-winglets vortex generators is conducted. The influence of three structural parameters (included angle (α), blockage ratio (BR), winglet pairs number (PN)) on the thermal performance of the enhanced tube are explored across a Reynolds number range of 7577 to 27,276. It is found that the vortex pairs near the tube wall contribute to enhancing the mixing uniformity of fluid flows in tubes. Furthermore, the dissipation intensity of the vortex pairs near the tube wall is increased with increasing α. The Nusselt number and friction factor are increased by 1.90–2.32 and 2.23–5.10 times, respectively, compared with the smooth tube. The maximum thermal enhancement factor reaches 1.63 when BR = 0.10, PN = 4, and α = 90°. Optimization strategies are performed through similarity analysis, and the similarity equations between structural parameters and flow field characteristics are obtained. These findings offer valuable theoretical insights for the design of winglet structures and the optimization of flow fields. •Multi-delta winglet vortex generators are investigated for heat transfer enhancement.•Vortices near tube wall contribute to enhancing mixing uniformity of fluid flows.•Dissipated intensity of vortices near tube wall increases with higher included angle.•Nu and f are increased by 1.90–2.32 and 2.23–5.10 times, respectively.•Optimization strategies for flow fields are performed through similarity analysis.